shopping cart empty
WORLDWIDE FREE SHIPPING

Where do you connect the balance leads?
Login to post a new topic and to write a reply.
Thread Tools Rate This Thread


Search within thread:

Login to rate this thread.
#1 (permalink)      12/31/2013 8:08:33 AM US Central   quote/reply + tips
madyicstik
Member
  • JoinedMay 2013
  • Posts 96
  • Reviews 3
  • Kudos35
Where do you connect the balance leads?
I just thout id ask.
#2 (permalink)      12/31/2013 8:10:47 AM US Central   quote/reply + tips
madyicstik
Member
  • JoinedMay 2013
  • Posts 96
  • Reviews 3
  • Kudos35
I mean this could be used to charge a 2 cell lipo/lion right?
#3 (permalink)      12/31/2013 8:14:08 AM US Central   quote/reply + tips
ramandr
Member
  • JoinedMay 2013
  • Posts 204
  • Reviews 10
  • Kudos61
It is designed to charge one ,i use it ( bought from another website) to charge 2 in parallel , it takes forever but it works :)
#4 (permalink)      12/31/2013 8:55:31 AM US Central   quote/reply + tips
madyicstik
Member
  • JoinedMay 2013
  • Posts 96
  • Reviews 3
  • Kudos35
So if i have a 7.4v or 2 cells in series i cant use this? Kinda defeats the purpose of having the input go as high as 8v would it not?
#5 (permalink)      12/31/2013 8:57:35 AM US Central   quote/reply + tips
ramandr
Member
  • JoinedMay 2013
  • Posts 204
  • Reviews 10
  • Kudos61
nono,definitey not for 2 batts in series the input is standard ~5V from miniusb
#6 (permalink)      12/31/2013 9:01:09 AM US Central   quote/reply + tips
madyicstik
Member
  • JoinedMay 2013
  • Posts 96
  • Reviews 3
  • Kudos35
Ok im confused as to the input voltage clearly says its 4v-8v id have to research more on this.
#7 (permalink)      12/31/2013 9:04:08 AM US Central   quote/reply + tips
warhawk
Member
  • JoinedAug 2013
  • Posts 334
  • Reviews 52
  • Kudos159
+4 details
5vdc USB mini input...regulates down to to the CC/CV charge pattern of Li Ion batteries using the TP4056 controller IC, you can change the regulated output current by changing the vprog resistor on pin 2

http://dlnmh9ip6v2uc.cloudfront.net/datasheets/Prototyping/TP4056.pdf

And you can build your own Li Ion single cell recharger

Edited on 12/31/2013 at 9:06 AM. Reason:
A vaper without a multimeter is like a mechanic without a wrench
#8 (permalink)      12/31/2013 9:05:24 AM US Central   quote/reply + tips
madyicstik
Member
  • JoinedMay 2013
  • Posts 96
  • Reviews 3
  • Kudos35
+3 details
Cool thanks
#9 (permalink)      1/24/2014 7:41:31 PM US Central   quote/reply + tips
i8ahorse
Member
  • JoinedJan 2014
  • Posts 1
  • Reviews 0
  • Kudos0
This board can be powered through the USB connector - Standard 5 volts
Or you can connect your INPUT power directly to the circuit board on the opposite end from the USB connector.
If you choose to connect your input this way, the input (to the board)can be a minimum of 4 volts to a maximum of 8 volts.
The output that charges a single cell will remain the same either way.
This is not designed to charge two cells in series, but as a previous reviewer stated, will charge more than one cell in parallel.
#10 (permalink)      2/13/2014 11:49:57 AM US Central   quote/reply + tips
sogseal
Member
  • JoinedFeb 2014
  • Posts 1
  • Reviews 0
  • Kudos0
warhawk,

where i can get that little monitor? Thank you
#11 (permalink)      3/10/2014 12:06:27 PM US Central   quote/reply + tips
Adiss
Member
  • JoinedNov 2013
  • Posts 5
  • Reviews 3
  • Kudos0
Well Sogseal if you search the internet under this name Mini 3 Digital LED DC 3-30V Blue Volt Voltage you will find it one tip try to serch for one with two wires + - its easy to connect.