shopping cart empty
WORLDWIDE FREE SHIPPING

What to do with your Lemo 2
Login to post a new topic and to write a reply.
Thread Tools Rate This Thread


Search within thread:

Login to rate this thread.
#1 (permalink)      1/24/2016 3:33:36 PM US Central   quote/reply + tips
Avatar
Wylie
Member
  • JoinedMay 2013
  • Posts 5141
  • Reviews 77
  • Kudos3353
+5 details
What to do with your Lemo 2
Think the Lemo 2 is old hat? Guess again! A couple carefully placed liquid inlets bring new life to what some may think is a washed up atomizer.

Yes that is 55 watts powering the lemo 2 with a 3.5mm 26 gauge SS coil inside. The large wick is to allow the wicks ends to be large enough to cover the indexed holes aligned just at the edge with the original liquid channels in the atomizing chamber.

Not a hard mod with a rotary tool, cutoff wheels and needle files.

Cheers! :D

Edit: The liquid in the Lemo is 90% VG too, wicks like a dream!

Edited on 1/24/2016 at 3:50 PM. Reason:
Always keep your ear to the ground!
#2 (permalink)      1/24/2016 11:19:32 PM US Central   quote/reply + tips
Avatar
tonypp
Member
  • JoinedNov 2014
  • Posts 2623
  • Reviews 210
  • Kudos1668
Show us the breakdown.
I don't even own a Lemo, but always interested to see some modding.
#3 (permalink)      1/24/2016 11:22:45 PM US Central   quote/reply + tips
Avatar
Wylie
Member
  • JoinedMay 2013
  • Posts 5141
  • Reviews 77
  • Kudos3353
It already sold, it's just a notch in the atomizing chamber is all but works very well. I tested it for a while before I sold it and it was hard to part with.
Always keep your ear to the ground!
#4 (permalink)      1/24/2016 11:25:06 PM US Central   quote/reply + tips
Avatar
Skeeeets
Member
  • JoinedFeb 2014
  • Posts 9629
  • Reviews 248
  • Kudos6340
Bummer.
In a drop top Chevy with the roof wide open, my partners looking at me to see if my eyes open cause I've been drankin and I've Been smokin'
#5 (permalink)      1/24/2016 11:28:17 PM US Central   quote/reply + tips
Avatar
Wylie
Member
  • JoinedMay 2013
  • Posts 5141
  • Reviews 77
  • Kudos3353
The guy who bought it isn't bummed, even turned a custom drip tip for it. I can always mod another one.
Always keep your ear to the ground!
#6 (permalink)      2/4/2016 7:21:45 AM US Central   quote/reply + tips
Avatar
JoeVan
Member
  • JoinedOct 2014
  • Posts 8084
  • Reviews 114
  • Kudos10452
I'll do this to mine, and post pics.

I've been needing a push to get the Lemo 2 modded.
Joke's on you, this isn't actually a raffle.
#7 (permalink)      2/4/2016 7:50:29 AM US Central   quote/reply + tips
Avatar
moayad
Member
  • JoinedJan 2015
  • Posts 1235
  • Reviews 113
  • Kudos790
Wylie
Admit that you have flooded your chamber when you left the mod 5 minutes on the table
don't screw the people here
#8 (permalink)      2/4/2016 7:52:43 AM US Central   quote/reply + tips
Avatar
JoeVan
Member
  • JoinedOct 2014
  • Posts 8084
  • Reviews 114
  • Kudos10452
My Lemo 2 is junk anyway. Might as well try and fix it. The way it's built, I don't think it will flood with his modification.
Joke's on you, this isn't actually a raffle.
#9 (permalink)      2/4/2016 7:59:52 AM US Central   quote/reply + tips
mindtrapper
Member
  • JoinedNov 2014
  • Posts 90
  • Reviews 8
  • Kudos17
I have done this ages ago (I think I posted here too) but not so wide. I did two thin slots (the width of the existing juice channels) going up to the deck. It is more prone to leaking after refilling but not as much as you think. You just need to add a bit more cotton, something like a Scottish roll but not that much, maybe 1.5x normal width.

I can leave it on its side no problem, in fact I do every night (afc closed) and it's fine when I open the afc in the morning. I have vaped the Lemo 2 at 100w with a twisted 24g coil, it was not even uncomfortable for 2 maybe 3 second drags.

(https://www.fasttech.com/forums/2256500/t/1652341/lemo-2-review-and-build?1737495)

I have since moved to 70VG/30PG and retired the istick 50 before it kills me. :) But beware: if you screw this up (don't align correctly after screwed or whatever) you have to buy another Lemo to get a barrel. They are impossible to find as a spare part.

Edited on 2/4/2016 at 8:12 AM. Reason:
#10 (permalink)      2/4/2016 8:45:59 AM US Central   quote/reply + tips
Avatar
JoeVan
Member
  • JoinedOct 2014
  • Posts 8084
  • Reviews 114
  • Kudos10452
Yeah I'm not doing it that wide. I'll do a couple slits right over the channels..

I started with a micro-file set, but that was taking forever, so I said fuckit.

Now that I have the diamond grinding set for the dremel it should go pretty easy.
Joke's on you, this isn't actually a raffle.
#11 (permalink)      2/4/2016 8:56:19 AM US Central   quote/reply + tips
Avatar
ShelaghStone
Member
  • JoinedJan 2015
  • Posts 32767
  • Reviews 189
  • Kudos23171
Joe, If you do it can you please post a picture - i am happy with my Lemo 2 but i do have 5 of them and 2 are now just parts, so always am interested but in my case i would need to see photos

thx
(*~*) Was bored to death.. RIP :)