shopping cart empty
WORLDWIDE FREE SHIPPING

Here is suitable screw
Login to post a new topic and to write a reply.
Thread Tools Rate This Thread


Search within thread:

Login to rate this thread.
#1 (permalink)      2/2/2019 7:07:25 PM US Central   quote/reply + tips
CnrSngl
Member
  • JoinedNov 2016
  • Posts 94
  • Reviews 81
  • Kudos86
+3 details
Here is suitable screw
I find out M2*4mm thread size / hexagonal head screws works for this atomizer's deck and even 510 pin.
For who need these; SKU 3976801.

Edited on 2/2/2019 at 7:16 PM. Reason:
#2 (permalink)      2/2/2019 7:28:23 PM US Central   quote/reply + tips
wuwei.ap
Member
  • JoinedMar 2015
  • Posts 20721
  • Reviews 266
  • Kudos39416
+4 details
On some of the dvarws the deck screws will bottom out if longer than 3mm (the 22mm YFTK versions). The 510 pin is 4mm for that version too and is a better choice for that part. 3mm is a safe size for the deck IMO.
#3 (permalink)      2/3/2019 7:55:45 AM US Central   quote/reply + tips
CnrSngl
Member
  • JoinedNov 2016
  • Posts 94
  • Reviews 81
  • Kudos86
+2 details
Screws which I share are identical with all Dvarw 16mm's screws. So, 4mm fit without any problem. I do not think 3mm is necessary yet it can be safer as you said. So, thanks for that.
(Screws that wuwei.ap said is here; SKU 3976800)

Anyway, these screws are not allow you to set 2.5mm diameter wire which I do not like this situation. 2mm is too narrow for me, no matter what I done, after 2 normal hit then dry hit! I could not fit 2.5mm diameter wire in it. So, I need more narrow head screws yet I could not find in here.

Edited on 2/3/2019 at 8:30 AM. Reason:
#4 (permalink)      2/3/2019 8:16:27 AM US Central   quote/reply + tips
Avatar
cilika
Member
  • JoinedSep 2013
  • Posts 13331
  • Reviews 340
  • Kudos26131
+2 details
Ha so, is it good or it isn't now.. :)
With this version I found more difficult to trap the wire (had the do a whole round) on the (sand blasted) CV clone, I found the screws to be much better.


Edit: ok, answered. Thanks!

Edited on 2/3/2019 at 8:17 AM. Reason:
#5 (permalink)      2/3/2019 8:22:16 AM US Central   quote/reply + tips
Avatar
cilika
Member
  • JoinedSep 2013
  • Posts 13331
  • Reviews 340
  • Kudos26131
+2 details
@CnrSngl I use in these these Dvarws 2mm coils and use them with quite low wattage, and not having dry hit prbs. No idea, exactly what wattage as they are in the Pico baby. But when I returned to this sort of vaping (with tight air-flow attys), I had to sort of re-train myself to vape them differently. (to pull less stronger, etc.)
#6 (permalink)      2/3/2019 8:40:26 AM US Central   quote/reply + tips
Avatar
gmm11
Member
  • JoinedMar 2016
  • Posts 4482
  • Reviews 158
  • Kudos5034
+2 details
wicking might be the problem if you are getting a dry hit after three draws
#7 (permalink)      2/3/2019 3:01:49 PM US Central   quote/reply + tips
CnrSngl
Member
  • JoinedNov 2016
  • Posts 94
  • Reviews 81
  • Kudos86
+3 details
I carefully manage to fit 2.5mm diameter 28ga kanthal a1 wire in Dvarw 16 and it ROCKS.
OMG it is soo good, I am in Heaven :)
#8 (permalink)      2/21/2019 11:54:13 AM US Central   quote/reply + tips
istomin2
Member
  • JoinedJun 2016
  • Posts 640
  • Reviews 15
  • Kudos322
Right, nicotine works miracles!
#9 (permalink)      2/22/2019 12:40:02 PM US Central   quote/reply + tips
notbody
Member
  • JoinedJan 2016
  • Posts 356
  • Reviews 0
  • Kudos162
CnrSngl wrote:

)Anyway, these screws are not allow you to set 2.5mm diameter wire which I do not like this situation. 2mm is too narrow for me, no matter what I done, after 2 normal hit then dry hit! I could not fit 2.5mm diameter wire in it. So, I need more narrow head screws yet I could not find in here.


had the same problem with over 60% vg + cold weather High Precision Needle File SKU 9659639 or sandpaper for the head.only need to file half of the head or less