shopping cart empty
[dismiss] Kung Hei Fat Choy. FastTech will be on holiday from January 20, 2020, to January 31, 2020. Shipping and support will resume normal service on February 1, 2020. (details)
Superdonkey's Product Reviews
Sort:
Resin 510 Drip Tip (5-Pack)
Resin 510 Drip Tip (5-Pack)

Superdonkey
Member

VERIFIED OWNER
  • JoinedMay 2017
  • Posts 99
  • Reviews 82
  • Kudos31
Overall   (4.5)
› Quality
› Value
2 of 2 people found the following review helpful
PROS
Nice quality
CONS
Color lottery :(
Feels good on the mouth, nice bore-to-height ratio makes good flavor. My 5-pack included 3 that were almost identical color (tan-brown). If you can be patient and submit a ticket regarding color choice, OR not care about the color, this is a good buy for 510 tips.
Reviewed on Was this review helpful to you? Yes / No
Authentic Cthulhu Mjolnir RDA Rebuildable Dripping Atomizer
Authentic Cthulhu Mjolnir RDA Rebuildable Dripping Atomizer

Superdonkey
Member

VERIFIED OWNER
  • JoinedMay 2017
  • Posts 99
  • Reviews 82
  • Kudos31
Overall   (5.0)
› Quality
› Value
2 of 2 people found the following review helpful
PROS
Flavor! Easy to build Not leaky Thoughtful design Build quality
CONS
Looks? (subjective) Drip tip is gorgeous but could be taller (subjective)
Do you like to use a dripper, but hate having to actually drip? Do you enjoy a somewhat restricted DL vape? Do you enjoy flavor chasing? Well, this RDA/RDTA is for you. The Mjolnir excels at mid-wattage flavor. Satisfying, dense vape is achieved by employing a 20 mm chamber. The air travels diagonally downwards from the outer vents, into a main air chamber / drip overflow. This design makes it very leak resistant. Even though the air travels in a J shape, there's no delay like top-airflow tanks give... the air feels natural and very smooth. Bottom airflow helps provide excellent flavor. Mjolnir slightly tops the flavor over many popular RDA's. The airflow is really smooth. You can hear it, but it doesn't whistle. The draw is fairly restricted. Here's a scale comparing some with other atomizers. From tight to open: Hadaly < Narda < O-Atty < Gas Mods GR1 < Mjolnir / Flave RDTA < Recurve < C4 < Citadel < Wasp. The juice well is enormous. (This could be a pro or a con for you.) Personally, I love dumping in almost 2 ml of juice at once and going to town with it. Haven't tried it as a squonker yet, but I'll edit the review once I do. Build quality is fantastic. The machining is very smooth, and tolerances are great. Top cap slides on and off smoothly, without wobble or stickiness. The positive post (held in by the 510 pin) fits snug without any movement. The deck assembly locks into place, so that it will align with the airflow holes on the top cap. The top cap has a limited range of motion, no endless spinning. My only complaint is that the o-rings for the top cap are a bit too loose. Other than that, it's flawless. The drip tip is unique and looks amazing. The bore is a lot more narrow than a standard 810, it fits the restricted air of the RDA well. It's got a matte finish, and vivid swirling. Mine looks like the stock photos, with partial burnt orange + white accenting over half of it. (Hooray for no Drip Tip Lottery!) The tip feels slightly rubbery, and slightly soft. I like the finish & feel on it a lot. Manufacturers, if you read this, please make taller versions with a similar finish! The deck is simple to build on. Little angled paths guide the coil legs into place, and grub screws trap the leads. The spares bag comes with slotted screws, if you dislike using hex keys while building. The deck can accommodate up to a 4 mm ID coil. My first successful build was SS 316L 30x4/40 fused clapton, 3.5 mm ID, spaced 5 wraps. Too much coil mass = way too hot of a vape for the air. Complex wires with moderate coil mass will probably work best in here. I've read reports that simple wire also works fine in the Mjolnir, but I haven't tried any yet. TL;DR: this is a great RDA. I hate that it didn't get more recognition when it launched, because it really is worthwhile. I've only had it for a month, and it's made several other popular atomizers fall into disuse. If this type of atomizer seems like it's your thing, then purchase without hesitation.
Reviewed on Was this review helpful to you? Yes / No
Steel Cleaning Brush for RBA Coil
Steel Cleaning Brush for RBA Coil

Superdonkey
Member

VERIFIED OWNER
  • JoinedMay 2017
  • Posts 99
  • Reviews 82
  • Kudos31
Overall   (5.0)
› Quality
› Value
1 of 1 people found the following review helpful
PROS
usable handle
CONS
brush spreads apart after a while
This is an excellent little brush. It's saved me a lot of money by letting me scour the coil after a dry-burn. My only complaint is that the bristles spread out after a while, making it hard to use while your dirty coil is still installed on your atomizer. I got a 10-pack with shorter handles to replace this one, but they're kinda too small to use. Ended up purchasing this one again.
Reviewed on Was this review helpful to you? Yes / No
Authentic MKWS 316L Stainless Steel Pre-Coiled Wires for RBA Atomizers (8 Specs)
Authentic MKWS 316L Stainless Steel Pre-Coiled Wires for RBA Atomizers (8 Specs)

Superdonkey
Member

VERIFIED OWNER
  • JoinedMay 2017
  • Posts 99
  • Reviews 82
  • Kudos31
Overall   (4.2)
› Quality
› Value
1 of 1 people found the following review helpful
PROS
cheap decent quality
CONS
"Aliens" lol Other coils in this kit are not practical / good vapes
Bought this when I first got into rebuildables. Most of the coils have sat in the pack, as they are just not wires with any realistic vape function. The best coils in here are the Fused Clapton; most of the rest are trash. All of the chunky irregularly shaped wire are just spitback creators. "Alien" coils are definitely not aliens, which was really common at the time this set was released. MKWS makes decent-to-good wire; their 26x3/38 Ni80 wire was clean and held up for a few dry burns.. I would steer clear of this sample pack and just buy a few spools that are more oriented towards your chosen atomizer.
Reviewed on Was this review helpful to you? Yes / No
Clapton Kanthal A1 Coiled Heating Wire for Rebuildable Atomizers
Clapton Kanthal A1 Coiled Heating Wire for Rebuildable Atomizers

Superdonkey
Member

VERIFIED OWNER
  • JoinedMay 2017
  • Posts 99
  • Reviews 82
  • Kudos31
Overall   (2.5)
› Quality
› Value
1 of 1 people found the following review helpful
PROS
nice jewel case packaging (lol)
CONS
Wrap is not fine enough really springy
I think this wire is a throwback to some of the first claptons that came out. Bought this when I first started building my own coils (and searched by popularity on this site, as I didn't know any better). I have since learned that your wrap gauge should be at least 8-12 gauges higher than your core wire. Wire is also really springy and difficult to coil properly. Consequently, this wire has sat unused in a drawer for quite some time. BONUS COMPLAINT: This is the only wire I've ever bought that included a silica dessicant pack, so I'm not sure what's going on there, but it makes me question the quality of this wire. There are tons of more modern wires out there nowadays. If you are looking to coil for MTL/flavor banger RDAs, look at superfine clapton 26x2/38 or 28x2/40.
Reviewed on Was this review helpful to you? Yes / No