shopping cart empty
denmonkey's Product Reviews
Sort:
Car Battery Alligator Clip to Cigarette Lighter Socket Adapter
Car Battery Alligator Clip to Cigarette Lighter Socket Adapter

denmonkey
Member

VERIFIED OWNER
  • JoinedSep 2013
  • Posts 288
  • Reviews 117
  • Kudos220
Overall   (4.2)
› Quality
› Value
2 of 2 people found the following review helpful
PROS
does what its meant to price is awesome
CONS
none
does what it should and handy for field work running off. I used mine for amateur radio and telescope field work with no issues. Due to the wire gauge I wouldn't suggest drawing big current through them.
Reviewed on Was this review helpful to you? Yes / No
Authentic XFKM 316L Stainless Steel Alien V2 Pre-Coiled Wire
Authentic XFKM 316L Stainless Steel Alien V2 Pre-Coiled Wire

denmonkey
Member

VERIFIED OWNER
  • JoinedSep 2013
  • Posts 288
  • Reviews 117
  • Kudos220
Overall   (5.0)
› Quality
› Value
1 of 1 people found the following review helpful
PROS
clean as described good flavour excellent carry tin
CONS
now I want more.
I'm normally a builder not a buyer and this is my first set of prebuilt coils. I grabbed them based on reviews and they were all right. I'm still a bit old school rocking 24g single strand spaced coils as a preference but figured I'd spoil myself with some fireball cotton as well for my new zeus x clone and see what all the fuss was about on all of these items. Nice combo with good flavour all round. Whilst I still prefer to just build myself, I think these would be an excellent add to the mobile kit, to be able to do a quick build when out and about will little to no hassle. keen to see how long they hold out with my tobacco juices. they all came very consistent build quality wise and a dual set up shows a resistance of 0.12 Ohm, which is bang on what the tin says. I've already ordered more variants from the same maker.
Reviewed on Was this review helpful to you? Yes / No
AOLVAPE Diagonal Cutting Pliers for E-Cigarette
AOLVAPE Diagonal Cutting Pliers for E-Cigarette

denmonkey
Member

VERIFIED OWNER
  • JoinedSep 2013
  • Posts 288
  • Reviews 117
  • Kudos220
Overall   (5.0)
› Quality
› Value
1 of 1 people found the following review helpful
PROS
small cut well cheap
CONS
none '
I just picked up a second pair based on the success of my existing ones of the same make. Solid little cutters and get into tight places. They are nice and small and work easily in the head. I'm puting together a 'go kit' so was looking for small items to stick in it that get the job done. for that role, these are a no brainer, but I also use them at home too.
Reviewed on Was this review helpful to you? Yes / No
Zeus X Styled RTA Rebuildable Tank Atomizer
Zeus X Styled RTA Rebuildable Tank Atomizer

denmonkey
Member

VERIFIED OWNER
  • JoinedSep 2013
  • Posts 288
  • Reviews 117
  • Kudos220
Overall   (4.5)
› Quality
› Value
1 of 1 people found the following review helpful
PROS
build solid colouring 2 glass tanks included good flavour plastic case included / no box
CONS
machining left overs oily
nice little flavor tank and excellent for the price. I purchased 2 of these, the second was missing the replacement glass bubble tank. not biggie. Be sure to check the deck posts very very closely for shard of metal left over from the screw holes in the posts. I, like others have found small shavings on the posts where the grub screws go in which have been left over from when they tapped the posts. This can be very dangerous if not removed and left there for you to inhale. Be sure to use a magnifying device as they can be hard to see with the naked eye. Still, nice little tank with good flavour and decent quality for sure. recommended.
Reviewed on Was this review helpful to you? Yes / No

denmonkey
Member

VERIFIED OWNER
  • JoinedSep 2013
  • Posts 288
  • Reviews 117
  • Kudos220
Overall   (2.0)
› Quality
› Value
1 of 1 people found the following review helpful
PROS
works ok
CONS
threads leaky orings burrs
overall and even for the price I would say give this one a miss. I've got it working ok for now but as others have said leaking is an issue with this one. I replaced the orings with the other supplied ones and its a bit better. The based is loose and the tank wobbles a little. There were also metal flakes on the posts which needed to be remove. Give it a good clean first. The threads are horrible. grinding and catching every time you try and build or fill it. I usually buy clones with a few exceptions over the years but this is probably the worst I've gotten thus far. I'd say look to the other options or spend your bucks elsewhere. I do like the tank though and will get a better version.
Reviewed on Was this review helpful to you? Yes / No