shopping cart empty
rmrfyou's Product Reviews
Sort:

rmrfyou
Member

VERIFIED OWNER
  • JoinedMar 2013
  • Posts 254
  • Reviews 35
  • Kudos41
Overall   (3.5)
› Quality
› Value
The circle disc / screw just pops in and out of the white plastic. So when i change the battery it pops out. Looks good though in hybrid mode
Reviewed on Was this review helpful to you? Yes / No
RGM2 Bottom Coil Clearomizer (2ml)
RGM2 Bottom Coil Clearomizer (2ml)

rmrfyou
Member

VERIFIED OWNER
  • JoinedMar 2013
  • Posts 254
  • Reviews 35
  • Kudos41
Overall   (4.5)
› Quality
› Value
The bottom coil system is easy to rebuild and taste great. Only problem is the metal cover doesn't exactly protect the tank. I dropped mine onto the floor and the tank broke. Would be nice if it was designed to protect the tank a little better otherwise it's a great topper for those egos and ego twists. I use mine with a regular 1300mah ego with a 1.5 ohm coil and works great.
Reviewed on Was this review helpful to you? Yes / No
RGM2 Bottom Coil Clearomizer (2ml)
RGM2 Bottom Coil Clearomizer (2ml)

rmrfyou
Member

VERIFIED OWNER
  • JoinedMar 2013
  • Posts 254
  • Reviews 35
  • Kudos41
Overall   (4.2)
› Quality
› Value
The bottom coil system is easy to rebuild and taste great. Only problem is the metal cover doesn't exactly protect the tank. I dropped mine onto the floor and the tank broke. Would be nice if it was designed to protect the tank a little better otherwise it's a great topper for those egos and ego twists. I use mine with a regular 1300mah ego with a 1.5 ohm coil and works great.
Reviewed on Was this review helpful to you? Yes / No
Battery/Driver Contact Support Spring for Flashlights DIY (10-Pack)
Battery/Driver Contact Support Spring for Flashlights DIY (10-Pack)

rmrfyou
Member

VERIFIED OWNER
  • JoinedMar 2013
  • Posts 254
  • Reviews 35
  • Kudos41
Overall   (4.7)
› Quality
› Value
My atom mechanical mod purchased here came with a cheap spring with resistance so it affected performance and it made the button hot. With the advice of another ft buyer i bought these springs clipped off the skinny end and replaced the spring. Now my mod works perfect and i love it
Reviewed on Was this review helpful to you? Yes / No

rmrfyou
Member

VERIFIED OWNER
  • JoinedMar 2013
  • Posts 254
  • Reviews 35
  • Kudos41
Overall   (3.7)
› Quality
› Value
With the hybrid bottom screwed onto my kf 3.1 and the 510 contact screwed in the nemesis button screws all the way into the mod because the contact is too thin and i use flat top batteries. So i used plumbers tape around the 510 contact screw so i can back out the screw about 3mm to make it snug and tight so the nemesis button can extend out of the mod
Reviewed on Was this review helpful to you? Yes / No