Free shipping to the United States when you order $20+

Here is the deck!
Login to post a new topic and to write a reply.
Thread Tools


Search within thread:

Rate This Thread
Login to rate this thread.
#11 (permalink)      10/23/2018 7:28:52 PM US Central   quote/reply + tips
Avatar
Caffeine
Verified
  • JoinedJul 2013
  • Posts 3712
  • Reviews 6
  • Kudos8741
Steve_ wrote:



@Caffeine
Interesting, didn't know that one. I saw Vic's review of the True tank yesterday and it did indeed look rather fiddly using the clamps.
You're right btw, this screw and clamp thing would be ideal for the tit nipple rda ;)



LOL, thx for the chuckle..been a loooong day today. :)

IMO, my Mace RDA has the ultimate in titty torture mechanics:



* Much bigger screwing with larger slots to boot..teehee!

#12 (permalink)      10/23/2018 11:45:11 PM US Central   quote/reply + tips
masood1
Verified
  • JoinedMay 2016
  • Posts 21
  • Reviews 119
  • Kudos3
Promising mtl atty by old man (naturevape)
#13 (permalink)      10/24/2018 3:51:32 AM US Central   quote/reply + tips
Avatar
analogueman
Verified
  • JoinedAug 2013
  • Posts 2969
  • Reviews 6
  • Kudos2412
+1 details
masood1 wrote:

Promising mtl atty by old man (naturevape)



He may not be a spring chicken any more, but the guy has been involved with vaping longer than most, and always goes the extra mile with people. Personally, I've got a lot of time for the bloke.

It's twelve inches long, but don't use it as a rule...
#14 (permalink)      10/24/2018 11:04:46 PM US Central   quote/reply + tips
Avatar
Caffeine
Verified
  • JoinedJul 2013
  • Posts 3712
  • Reviews 6
  • Kudos8741
+1 details
Steve_ wrote:


@Caffeine
Interesting, didn't know that one. I saw Vic's review of the True tank yesterday and it did indeed look rather fiddly using the clamps.
You're right btw, this screw and clamp thing would be ideal for the tit nipple rda ;)



FWIW, I have both v1 and v2 and while both can perform well, the v2 is far easier to work with. It's more like the Drop RDA while still being an Ody clone. :)

this: SKU 8599000

I have it on my Underground SQK mech, it's awesome with a single twisted wire build.

#15 (permalink)      10/25/2018 11:41:02 PM US Central   quote/reply + tips
Froese
Verified
  • JoinedApr 2016
  • Posts 166
  • Reviews 6
  • Kudos115
+2 details
I don't like the deep refill cutouts in the top plate. All the collected dust, dirt, gunk, whatever will be pushed right into the tank when refilling ...
#16 (permalink)      10/25/2018 11:59:08 PM US Central   quote/reply + tips
mickade
Verified
  • JoinedJul 2015
  • Posts 273
  • Reviews 9
  • Kudos60
Nvr tried an rda
#17 (permalink)      4/9/2019 7:55:58 PM US Central   quote/reply + tips
mickade
Verified
  • JoinedJul 2015
  • Posts 273
  • Reviews 9
  • Kudos60
Ok i have two of these tanks now both leak through the air holes dont say its wicking i know how to wick this tank is a leaker bugger it what waste of coin.
#18 (permalink)      4/18/2019 3:30:15 AM US Central   quote/reply + tips
mickade
Verified
  • JoinedJul 2015
  • Posts 273
  • Reviews 9
  • Kudos60
Ha i fixed my issues non leaker
#19 (permalink)      4/26/2019 2:37:29 AM US Central   quote/reply + tips
Fiverocker
Verified
  • JoinedJul 2016
  • Posts 13
  • Reviews 3
  • Kudos4
Care to elaborate what was the problem and how you fixed it? Might help others fix their leaking issued too?
#20 (permalink)      4/26/2019 5:45:56 PM US Central   quote/reply + tips
mickade
Verified
  • JoinedJul 2015
  • Posts 273
  • Reviews 9
  • Kudos60
I trimmed the plastic out that partially blocked the top fill holes. I also use a finer dropper tip to fill and put it on an angle also fill slow. What was happening b4 was when i filled it was a downward pressure causing it to flood. I was only getting flooding after refills i did go bottom fill but found it awkward. No more flooding now just remember fill it gently i had a few beers lol n forgot and flooded it. Overall its a great vape filling is the key fill it right wicking is easy enough.

Below links to how fasttech tank looks and not from fasttech how it should really look i believe.
Mine https://ibb.co/7GkH6Cs
How it should look https://ibb.co/r4RWVHF

Edited on 4/27/2019 at 5:49 PM. Reason: mistakes
#21 (permalink)      4/28/2019 3:51:16 AM US Central   quote/reply + tips
Fiverocker
Verified
  • JoinedJul 2016
  • Posts 13
  • Reviews 3
  • Kudos4
Thanks!