Free shipping to the United States when you order $20+

Airflow Fail
Login to post a new topic and to write a reply.
Thread Tools


Search within thread:

Rate This Thread
Login to rate this thread.
#1 (permalink)      5/24/2019 5:48:49 AM US Central   quote/reply + tips
Johnnyace
Verified
  • JoinedJul 2015
  • Posts 316
  • Reviews 106
  • Kudos150
$1.00 rebate earned+6 details
Airflow Fail
Look at the notches on the chimney then look at the deck, then look at the authentic

The notches are supposed to be below the airflow holes so the airflow lines up with the coils, not the ends of coils hitting them length ways
Answer
Anniepan
Staff |M|
  • JoinedNov 2016
  • Posts 11458
  • Reviews 2
  • Kudos5954
Hello Johnnyace,

Thanks for your feedback of the issue.

We have forwarded your feedback to our manufacturer and asked them to improve.

Thank you again.
#2 (permalink)      5/28/2019 9:29:23 AM US Central   quote/reply + tips
HakkxCore
Verified
  • JoinedJun 2018
  • Posts 1
  • Reviews 0
  • Kudos2
+2 details
looks fine to me, the notches on the deck arent positioned where the coils are so when locked in place the airflow will be right at the coils.
#3 (permalink)      5/28/2019 10:25:56 AM US Central   quote/reply + tips
Avatar
Athos.23
Verified
  • JoinedAug 2016
  • Posts 1414
  • Reviews 9
  • Kudos1359



P.S: another fail hahahah


Edited on 5/28/2019 at 8:50 PM. Reason:
¦¦¦ IF I HELPED YOU GIVE ME A HAND, PUT +TIPS, THANK YOU IN ADVANCE FOR ANYTHING YOU DO, BLESS ††† ¦¦¦
#4 (permalink)      5/28/2019 10:37:09 AM US Central   quote/reply + tips
Johnnyace
Verified
  • JoinedJul 2015
  • Posts 316
  • Reviews 106
  • Kudos150
+2 details
Yep, look at those comparison photos, look at were the little cut outs are on the chimney for the notches on the deck. Then think were the chimney slots onto the deck & how the airholes line up to in relation to where the coils are.

On the authentic, the airholes line up so that air hits the sides of the coil, like it's supposed to

Then look at the clone, the airholes hit both ends of the coil, like they're not supposed to

The clone has it completely wrong & is thus, a fail :D

Edited on 5/28/2019 at 10:47 AM. Reason:
#5 (permalink)      5/28/2019 10:51:44 AM US Central   quote/reply + tips
VitasPanties
Forum Restricted
  • JoinedMay 2019
  • Posts 75
  • Reviews 0
  • Kudos50
Johnnyace wrote:

Yep, look at those comparison photos, look at were the little cut outs are on the chimney for the notches on the deck. Then think were the chimney slots onto the deck & how the airholes line up to in relation to where the coils are. On the authentic, the airholes line up so that air hits the sides of the coil, like it's supposed toThen look at the clone, the airholes hit both ends of the coil, like they're not supposed to The clone has it completely wrong & is thus, a fail :D



☝️😛☝️🍼😭

#6 (permalink)      5/28/2019 2:36:47 PM US Central   quote/reply + tips
Avatar
Andy.lion
Verified
  • JoinedMay 2015
  • Posts 12069
  • Reviews 25
  • Kudos32088
+2 details
Johnnyace wrote:

Yep, look at those comparison photos, look at were the little cut outs are on the chimney for the notches on the deck. Then think were the chimney slots onto the deck & how the airholes line up to in relation to where the coils are. On the authentic, the airholes line up so that air hits the sides of the coil, like it's supposed toThen look at the clone, the airholes hit both ends of the coil, like they're not supposed to The clone has it completely wrong & is thus, a fail :D




*nodding*

He’s right ya know...

I learned long ago, never to wrestle with a pig. You both get dirty, but the pig likes it.” George Bernard Shaw
#7 (permalink)      5/28/2019 3:24:57 PM US Central   quote/reply + tips
Avatar
TruckinVapor
Verified
  • JoinedSep 2013
  • Posts 3752
  • Reviews 6
  • Kudos5456
+2 details
Holy bejebus... Glad I bought my clone elsewhere.;)
Living is the only thing worth dying for...
#8 (permalink)      5/28/2019 3:49:10 PM US Central   quote/reply + tips
Johnnyace
Verified
  • JoinedJul 2015
  • Posts 316
  • Reviews 106
  • Kudos150
+2 details
I have now, it's sure hot over there
#9 (permalink)      5/28/2019 4:08:18 PM US Central   quote/reply + tips
Avatar
TruckinVapor
Verified
  • JoinedSep 2013
  • Posts 3752
  • Reviews 6
  • Kudos5456
+3 details
Had to clean and rewick, so I thought I'd snap a pic... Don't have the authentic, but I'd say it's as close as you're going to get too 1:1



Great tank BTW, I'm sure you'll enjoy it Johnnyace!
Living is the only thing worth dying for...
#10 (permalink)      5/28/2019 4:12:13 PM US Central   quote/reply + tips
Johnnyace
Verified
  • JoinedJul 2015
  • Posts 316
  • Reviews 106
  • Kudos150
+3 details
Looks all good to me there pal!!

I have one on the way & an authentic in blue from here. I still use the Duel & it's awesome
#11 (permalink)      5/28/2019 6:04:17 PM US Central   quote/reply + tips
Avatar
Athos.23
Verified
  • JoinedAug 2016
  • Posts 1414
  • Reviews 9
  • Kudos1359
+2 details
Johnnyace wrote:

Yep, look at those comparison photos, look at were the little cut outs are on the chimney for the notches on the deck. Then think were the chimney slots onto the deck & how the airholes line up to in relation to where the coils are. On the authentic, the airholes line up so that air hits the sides of the coil, like it's supposed toThen look at the clone, the airholes hit both ends of the coil, like they're not supposed to The clone has it completely wrong & is thus, a fail :D






I'm sorry, now I understand what you meant ...+kudos Man
I'm a stupid, this also blames google translate hahahahah
however, now I have watched the problem carefully
practically has the air holes that instead of slamming laterally to the coil they bang on the cotton, all wrong Fail
could be solved with a correct chamber to replace
FT should sell it as spare parts
but I would say Chamber Fail instead of Total Fail
I don't understand manufactured how to make production mistakes like that
even the resin versions have the wrong chamber,

the only one that comes near is the 1 batch, which however has the holes arranged horizontally


Edited on 5/28/2019 at 6:27 PM. Reason:
¦¦¦ IF I HELPED YOU GIVE ME A HAND, PUT +TIPS, THANK YOU IN ADVANCE FOR ANYTHING YOU DO, BLESS ††† ¦¦¦