shopping cart empty
WORLDWIDE FREE SHIPPING

MTL or DL?
Login to post a new topic and to write a reply.
Thread Tools Rate This Thread


Search within thread:

Login to rate this thread.
#1 (permalink)      6/26/2019 7:16:36 AM US Central   quote/reply + tips
CnrSngl
Member
  • JoinedNov 2016
  • Posts 141
  • Reviews 101
  • Kudos149
MTL or DL?
Description says MTL module but other websites sell it as DL module for TF GTR RTA. Is it MTL module or DL module?
Also, please write air-flow diametres.
@Anniepan
#2 (permalink)      6/26/2019 8:20:09 AM US Central   quote/reply + tips
Avatar
desuede
Member
  • JoinedOct 2015
  • Posts 2452
  • Reviews 0
  • Kudos3891
+2 details
It seems to be mislabeled.
It is most likely a DL module.

On the original Taifun GTR the airflow slots are 1.0mm and 1.2mm in diameter.
On the DL module from Smokerstore the slots are 0.9mm and 1.5mm in diameter.

And there is no "MTL module" for the original Taifun GTR.
#3 (permalink)      6/26/2019 8:52:58 AM US Central   quote/reply + tips
essellar
Member
  • JoinedSep 2016
  • Posts 2265
  • Reviews 0
  • Kudos1960
+3 details
It's fairer to say there's no DL module for the GTR - there's a mid-range MTL with fine adjustments and a wide-range MTL (it goes both tighter and looser) with coarser steps between settings. You can get a restricted DL with the optional module, but it's still within the range some people would call "modern MTL". (Not me. If I were to pick this up, it would be for the 0.9mm hole... but 0.9mm is still a little loose for me. The default 1mm minimum means this would be as uncomfortable to use as the KF Prime.)
#4 (permalink)      7/5/2019 5:44:03 PM US Central   quote/reply + tips
SOLOMONgrundy
Member
  • JoinedJun 2016
  • Posts 1016
  • Reviews 55
  • Kudos366
I was looking on another page and yes they're two decks.this one is m2l guys the other deck you can buy has a nice oval hole.more oblong, I'm sure you understand.but they're 2 replaceable decks.
#5 (permalink)      7/23/2019 6:50:13 AM US Central   quote/reply + tips
Musard
Member
  • JoinedNov 2014
  • Posts 2
  • Reviews 11
  • Kudos1
+1 details
C'est un DL je viens de le recevoir.
#6 (permalink)      5/12/2020 4:32:53 AM US Central   quote/reply + tips
The_Masteres
Member
  • JoinedJan 2019
  • Posts 470
  • Reviews 2
  • Kudos144
Is it possible to use only the small hole 0.9 on this module to have a a tight mtl draw ??

Thx
#7 (permalink)      5/12/2020 5:28:12 AM US Central   quote/reply + tips
Avatar
djvillan
Member
The_Masteres wrote:

Is it possible to use only the small hole 0.9 on this module to have a a tight mtl draw ??

Thx

Yes.

https://www.youtube.com/watch?v=bgPDW0ZpgJU
#8 (permalink)      5/12/2020 5:44:25 AM US Central   quote/reply + tips
The_Masteres
Member
  • JoinedJan 2019
  • Posts 470
  • Reviews 2
  • Kudos144
Thank you !