shopping cart empty
[dismiss] FastTech will be on holiday from October 1st, 2020 to October 8th, 2020 to celebrate the National Day Holiday and Mid-Autumn Festival. Services will resume on October 9th, 2020 (details).
WORLDWIDE FREE SHIPPING

Anyone?
Login to post a new topic and to write a reply.
Thread Tools Rate This Thread


Search within thread:

Login to rate this thread.
#11 (permalink)      11/15/2019 1:27:51 AM US Central   quote/reply + tips
AshF1
Member
  • JoinedMar 2016
  • Posts 185
  • Reviews 301
  • Kudos75
+1 details
🤔
#12 (permalink)      11/15/2019 7:36:14 AM US Central   quote/reply + tips
Vape696969
Member
  • JoinedSep 2016
  • Posts 34
  • Reviews 0
  • Kudos8
+1 details
@AshF1, I don’t think the original have other airflow options as the three mentioned: 0.8, 1.5 & 2mm
I would have liked to see the Mtl range length a little less drastic than 0.8 to 1.5mm. I’m ok with 0.8 but the usual 1.2 or 1mm would have been welcomed.

@anniepan: I would appreciate a spare pc or pei tank section in case of a terrible accident. The original comes with a pei drip tip either. If that’s your thing.
#13 (permalink)      11/23/2019 3:41:45 PM US Central   quote/reply + tips
rabban199
Member
  • JoinedDec 2018
  • Posts 1
  • Reviews 1
  • Kudos3
+3 details
This tank need to be fixed manually.

First - transparent body part constantly unscrews in a middle instead of a bottom part - pain! Topcap unscrews just awful. Changed bottom and topcap o-rings with silicon ones, became better. Body zone fixed with silicon glue - once and for ever, hope someday will be a one-peace body.

Second - size of airflow inserts was measured by idiot. It is too tight (0,8!!! c'mon it is made for cheek workout???) or too free (1,5+) WHY???? Why non 1,0 - 1,2 - 1,4 if you making MTL???? Took 0,8 and drilled up to 1,0 - now it is perfect.

Third - Split protection. Serious? What for? Steals taste. Removed. Totally.

Finally it turned into something worth spended money.

Edited on 11/23/2019 at 3:47 PM. Reason:
#14 (permalink)      12/22/2019 3:53:35 AM US Central   quote/reply + tips
sputttnik
Member
  • JoinedAug 2016
  • Posts 7
  • Reviews 1
  • Kudos15
2 months later and i am still happy and using it every day.

Yeah i agree with most of the points above but found the 1.5 insert to be fine for mtl although it took me a day or two to get used to. Good idea with the bottom as it can be a pain sometimes but not always. I find if i lubricate the screw sections then i dont have so many issues, and over time it seems to get a bit better.

Spit protection, maybe unnecessary but i dont like eliquid spit in my mouth and it does happen sometimes with some of my other tanks. It's the still the best mtl tank i have for flavour.

Where and which silicon o-rings did you use?
#15 (permalink)      1/2/2020 6:42:38 AM US Central   quote/reply + tips
Oscar24
Member
  • JoinedSep 2017
  • Posts 8
  • Reviews 63
  • Kudos2
I confirm the bad and the good things written before.
Good flavor and easy to coil and refill, but size of airflow insert miss the 1.0 or 1.2 mm
(it is so hard to provide with some little piece of aluminum?).
When I refill it I have to wash up split protection section.
I don’t like original drip tip and replaced with SKU 2185508: I find it’s better.
After replacing all o-rings now it works good.
#16 (permalink)      1/2/2020 6:54:47 AM US Central   quote/reply + tips
Dimitrow
Member
  • JoinedDec 2018
  • Posts 6
  • Reviews 0
  • Kudos1
Oscar24 wrote:

I confirm the bad and the good things written before.
Good flavor and easy to coil and refill, but size of airflow insert miss the 1.0 or 1.2 mm
(it is so hard to provide with some little piece of aluminum?).
When I refill it I have to wash up split protection section.
I don’t like original drip tip and replaced with SKU 2185508: I find it’s better.
After replacing all o-rings now it works good.



Where did you get the new o-rings?

#17 (permalink)      1/2/2020 11:18:18 AM US Central   quote/reply + tips
Oscar24
Member
  • JoinedSep 2017
  • Posts 8
  • Reviews 63
  • Kudos2
+1 details
Here on FT Dimitrow
for example SKU 9648996
or SKU 9648239
#18 (permalink)      1/2/2020 11:18:30 AM US Central   quote/reply + tips
Oscar24
Member
  • JoinedSep 2017
  • Posts 8
  • Reviews 63
  • Kudos2
+1 details
Here on FT Dimitrow
for example SKU 9648996
or SKU 9648239
#19 (permalink)      1/22/2020 3:39:15 PM US Central   quote/reply + tips
Avatar
analogueman
Member
  • JoinedAug 2013
  • Posts 1443
  • Reviews 3
  • Kudos1090
+1 details
Vape696969 wrote:

@anniepan: I would appreciate a spare pc or pei tank section in case of a terrible accident.


Spare PC tanks would be really appreciated. I broke mine yesterday afternoon... :-(