shopping cart empty
WORLDWIDE FREE SHIPPING

How is the quality of this RTA
Login to post a new topic and to write a reply.
Thread Tools Rate This Thread


Search within thread:

Login to rate this thread.
#11 (permalink)      7/19/2021 6:38:32 PM US Central   quote/reply + tips
Avatar
djvillan
Member
+1 details
starman112 wrote:

Hi piffpuff you unscrew the bottom plate inside the plate there is a lip the o'rings i put on the the outside the lip.Putting o'rings on this cuts down the space between the airflow and the plate tightens the draw a lot.I Tryed 1.2mm thickness first made it better but 1.5mm thickness made it even better for me

Which airflow positive post are you using? The 2 x 1.2mm, 1 x 1.8mm or 1 x 1mm post? This Coppervape clone did come with all three positive posts didn't it?

https://www.youtube.com/watch?v=bgPDW0ZpgJU
#12 (permalink)      7/19/2021 6:55:28 PM US Central   quote/reply + tips
starman112
Member
  • JoinedOct 2014
  • Posts 146
  • Reviews 484
  • Kudos69
+2 details
Djvillan it comes with 3 positive posts.The sizes are 1 x1.2mm,1 x 1.8mm and 2 x 0.8mm.I make my own reducers so i made a 1.1mm reducer and put it in the 1.8mm post i just wrap coils for my reducers use drill bits and coil tool to do this and gently place in the post
#13 (permalink)      7/20/2021 1:09:53 PM US Central   quote/reply + tips
The_Masteres
Member
  • JoinedJan 2019
  • Posts 508
  • Reviews 2
  • Kudos155
+1 details
starman112 wrote:

Djvillan it comes with 3 positive posts.The sizes are 1 x1.2mm,1 x 1.8mm and 2 x 0.8mm.I make my own reducers so i made a 1.1mm reducer and put it in the 1.8mm post i just wrap coils for my reducers use drill bits and coil tool to do this and gently place in the post



Thanks for confirming what I already was expecting, no 1mm airflow insert. I pass on this one.

#14 (permalink)      7/20/2021 5:35:07 PM US Central   quote/reply + tips
Avatar
djvillan
Member
The_Masteres wrote:

Thanks for confirming what I already was expecting, no 1mm airflow insert. I pass on this one.

Only Ulton made the 1mm airflow post on the V1. I did receive an unbranded V1 clone from the 3 place and it came with the extra 1mm airflow post. I'm guessing they sent me an Ulton clone by mistake as it came in the familiar Ulton corkscrew tube but without the Ulton sticker on it.

https://www.youtube.com/watch?v=bgPDW0ZpgJU
#15 (permalink)      7/20/2021 7:41:19 PM US Central   quote/reply + tips
Tony215
Member
  • JoinedMar 2020
  • Posts 410
  • Reviews 11
  • Kudos99
Post deleted by mod (Anniepan) on grounds of: Advertisement
#16 (permalink)      8/5/2021 2:21:54 PM US Central   quote/reply + tips
piffpuff
Member
  • JoinedJun 2017
  • Posts 132
  • Reviews 34
  • Kudos86
djvillan wrote:

starman112 wrote:
Hi piffpuff you unscrew the bottom plate inside the plate there is a lip the o'rings i put on the the outside the lip.Putting o'rings on this cuts down the space between the airflow and the plate tightens the draw a lot.I Tryed 1.2mm thickness first made it better but 1.5mm thickness made it even better for me.




Hi Starman,
and a late thank you for your helpful reply.

I now can confirm the draw improves a lot when the pass-system gets coated.

The draw becomes less turbulent and is less noisy.

_____________________________________________________________

And I would like to mention for anyone searching for an MTL RTA in 2021 the dissatisfaction with the Coppervape Millennium for me stems from having only the very best vape experience without any tinkering on a 415 MTL or Ultima.


Edited on 9/2/2021 at 3:47 PM. Reason:
#17 (permalink)      8/6/2021 6:07:09 PM US Central   quote/reply + tips
starman112
Member
  • JoinedOct 2014
  • Posts 146
  • Reviews 484
  • Kudos69
Your welcome Piffpuff glad to be off heLp.Your right about the 415 ultima reived 2 this week fantastic MTL RTA