ArminF's Product Reviews
Sort:

ArminF
Verified

VERIFIED OWNER
  • JoinedApr 2014
  • Posts 185
  • Reviews 44
  • Kudos64
Overall   (4.5)
› Quality
› Value
PROS
- very easy build deck - can take ready build coils (leaves of the coil do not matter now) - Flavor is pretty good (but this depends on wire, air and self expression) compared to my other atties. - DT is 810 and 510 compatible - size is not to big but also not to small (mid profile i would say 30 mm with DT) - Alumide Caps 2 different kind of airflow - easy to squonk (hard to oversquonk) - kind of smooth sound while vaping
CONS
- Caps could be smaller if post screws would be grub screws - Oring are a not so tight
So had no whizzle on the airflow like some reviewers had. Tested a Ni80 4x0.40 flused clapton in it. Caps went very warm but was still ok. Now run a 4x0.32 build in and cap keeps normal. Build is Ni80 4 Wraps on 3 mm. Running on a mech mod. Customization - changed DT to Teflon Version SKU 6770202 (Randal_H -> this was the one you proposed for the flave but i got another kind where i could not put in orings but it found its place now) Builds always 4 wraps on 3 mm (between 0.17 and 0.21 ohms) NI80 4x0.40 fused -> SKU 9628650 NI80 4x0.32 fused -> SKU 9628652 Next to test (already ordered) > SKU 9600006 Cotton -> SKU 99623836 (not the best but OK) AND Could put a WASP NANO cap on the atty. It fits but there is a little gap between the airflow channel and the cap. But works. SKU 9628441 Entheon Cleap Cap works as well but needs to be sanded 2/3mm from the bottom.
Reviewed on

ArminF
Verified

VERIFIED OWNER
  • JoinedApr 2014
  • Posts 185
  • Reviews 44
  • Kudos64
Overall   (4.5)
› Quality
› Value
PROS
Filling - Pull off top cap and fill. Goes unblemished with Unicorn and Gorilla bottles thanks to the two large air holes. No annoying silicone stuffed or other handstands. In addition TopFill which prevents a leakage in the pod. Coil Life - For me and my sweet, creamy pudding liquids, the pods last a long time. All others had between 3 and 6 days left. This time it even made it up to 3 weeks. Taste/Flavour - Should be almost at the top. The best pod I've vaped so far. Charge - 30 minutes for a full charge at 0.7A. So long can you really wait. Any other was far over time. Pods - 1 pod - 1 charge - so the 2 ML are enough until the battery is empty. Auto Draw - Again, the hype. The automatic draw is really good. Always works and can if you want to be made by button. On / Off - You can also switch off the pod. That was also important to me because the automatic draw is also off and auto fire is prevented while carry it. Price / Value -Was not that important but worth mentioning. For a 20/30 CHF device it offers safety, fun, handling and is reliable. Also, the coils are "cheap" for the life. 20 pack is a pod at 2.50 CHF. Handling - The Pod has fallen down to me now a few times, was on the beach in the sand and I stepped on it too. All but a few scratches are still running. Customizing - Also 3rd party manufacturers have now refilled and coloured transparent caps supplied. Matchy - Matchy and you see the liquid even better.
CONS
Transparent Caps from Uwell
Conclusion: Have now 5 pieces. 3 in use and 2 in reserve. So far no new other device tasted nor bought. Have recommended it to my father-in-law and he is also satisfied. It would also refer to any other recommendation and to the "loose" MTL. We were just 3 weeks in Cyprus at 35 - 40 degrees. I've never been so stress-free on vacation. A few pods and a USB charger and liquid. That's it. Compared to earlier a picnic. Had my 3 which I need in action and no one has let me down. I'm curious about the winter because I steam outside is outside temperature crucial. Too cold and the taste suffers brutally.
Reviewed on

ArminF
Verified

VERIFIED OWNER
  • JoinedApr 2014
  • Posts 185
  • Reviews 44
  • Kudos64
Overall   (4.5)
› Quality
› Value
PROS
Small Factor Able to load 21700 Batteries Adjustable Amp
CONS
none
Excellent if you are on a trip or in the office. You are just more flexible. Can even charge with a powerbank. Or use the charger cable from any android phone and you are good to go. Works with iOS charger and usb cable as well. AND charging in the car is possible. like it very much
Reviewed on

ArminF
Verified

VERIFIED OWNER
  • JoinedApr 2014
  • Posts 185
  • Reviews 44
  • Kudos64
Overall   (4.7)
› Quality
› Value
PROS
- sit better, they really click into place. Hope that this will seal like the original ones. - bit darker transparent color - Cheaper than the PE Version
CONS
so far none.. OK, could be a bit lighter color to be more transparent
Received them today. First impressions see above So lets see. Got 2 cases reported from the old (PE) ones where a Pod flushed out over night. One was standing on the table. Pod only. The second was in the battery and ran through the whole battery body.... For myself i can say that the PE Version did bring more liquid onto the pod outside and inside the device. But mine never leaked out the whole liquid from the pod. Nevertheless i had more maintenance with cleaning and more liquid on my hands. I hope these Acrylic Version will sit and seal better. So lets test and keep fingers crossed.
Reviewed on
SXK BB Styled 60W All-in-One Box Mod Kit (Black)
SXK BB Styled 60W All-in-One Box Mod Kit (Black)

ArminF
Verified

VERIFIED OWNER
  • JoinedApr 2014
  • Posts 185
  • Reviews 44
  • Kudos64
Overall   (4.5)
› Quality
› Value
PROS
- very good build quality - DNA 60 authentic - Escribe ready - Firmware upgradeable - All contacts are solid - Doors sitting without rattling
CONS
none
I am in love. i do vape since 7 years now. Had a lot of Asian products in my hand. Ok i do not own an authentic but the build quality and handling of this box is really outstanding. SXK did a wonderful and provided an upgrade which the authentic does not offer. a USB port. This is very important in my view as you now can use escribe software to change the profiles on the chip to you own need. Ordered another one!
Reviewed on