Bill6565's Product Reviews
Sort:

Bill6565
Verified

VERIFIED OWNER
  • JoinedFeb 2014
  • Posts 145
  • Reviews 74
  • Kudos25
Overall   (4.7)
› Quality
› Value
PROS
work very nicely
CONS
its picky act odd some times see 8888 or it read odd 1.20ohms some times, basic bad connection with the battery i think i change battery it goes away. come without any booklet tell you how to use many menu in this unit! Basic its a guessing game i guess!
K-max Functions 1.Output voltage from 3V-6V. 2.Output wattage from 3W-15W. 3.Can measure the resistance of atomizers 4. LCD displays “HHH” when the voltage is too high . 5. When the LCD displays “123456789”,the Kmax is in standby mode. 6.Time limit protection: It will shut down when more than 10s each puff. 7. When the single-battery voltage is lower than 3.3V or double-batteries voltage is lower than 6.5V, the screen will show LoU as a reminder of recharging the battery. 8.One button with 7 menus. 9.Reverse battery protection keeps circuit safe if the battery is installed improperly. 10.The bottom is explosion proof, safer!! 11.Armature Current<=50uA ================= Button Function: (triple click the button to access the menus) there are 7 levels of menu... Menu Setting (Indication) Function Operation Instruction “1.Uu”--Voltage up “1.Pu”--Wattage up *Menu 1 Power adjust up In standby mode, press the button 3 times continuously , LCD shows“1.Uu/1.Pu”,release the button ,it comes to the menu 1,adjust the voltage or wattage up in 0.1v/0.5w. It will rotate back to 3.0 and go up again when it reach 6.0v( or 15w) “2.Ud”--Voltage down “2.Pd”--Wattage down *Menu 2 Power adjust down In standby mode, press the button 4 times continuously , LCD shows“2.Ud/2.Pd”,release the button ,it comes to the menu 2,adjust the voltage or wattage down in 0.1v/0.5w. “3.S.o”--Standby on/off Option: “S.on”-ON, “S.oF”-OFF *Menu 3 Power ON/OFF In standby mode, press the button 5 times continuously ,LCD shows“3.So”, release the button ,it come to the menu 3,choose “S.on” or “S.oF”.LCD will display “---”and system locked when you choose “S.oF”, repeat it and choose “S.on” to restart the system. “4.Uc” Voltage check of battery *Menu 4 Battery Check In standby mode, press the button 6 time continuously ,LCD shows”4.Uc”, release the button ,it come to the menu 4,LCD will display the voltage of the battery. “5.ds”--Display change, Option: “d.o” output voltage or operating wattage; “d.R”atomizer resistance “d.u” battery voltage *Menu 5 Display info setting during vaping In standby mode, press the button 7 times continuously ,when the LCD shows”5.Uc”, release the button ,it come to the menu 5,choose “do/dR/du”, “do”: output voltage “dR”: atomizer resistance “du”: battery voltage “6.Lo”LED Display on/off Option: “L.on”-ON, “L.oF”-OFF *Menu 6; LED ON /OFF In standby mode, press the button 8 times continuously, when the LCD shows “6.Lo”,release the button, choose “L.on” or“L.oF”, “L.on” :LCD on when smoking. “L.oF”: LCD off when smoking. **Menu 7 “7.UP” Voltage or "Po" Wattage (switch control to adjust volts or watts) Option: “Uo”—adjust voltage, “Po”—adjust wattage In standby mode, press the button 9 times continuously, when the LCD shows “7.UP”,release the button, choose “Po” or “Uo”, “Po”: Power(wattage) “Uo”: Voltage *Menu 8; couldn't find information on this menu 8 to use? look online found no then) unknown
Reviewed on

Bill6565
Verified

VERIFIED OWNER
  • JoinedFeb 2014
  • Posts 145
  • Reviews 74
  • Kudos25
Overall   (2.5)
› Quality
› Value
PROS
build solid and runs some what ok
CONS
don't give a set reading, screw in tight reading get not right, the number will change when disconnect then screw it back-in to retest will not be same reading. other wise it fail big time, came with dead battier as will.
going to read order another brand name next weekend! not very happy with this!
Reviewed on

Bill6565
Verified

VERIFIED OWNER
  • JoinedFeb 2014
  • Posts 145
  • Reviews 74
  • Kudos25
Overall   (5.0)
› Quality
› Value
PROS
no then really say good or bad it's 510 drip-tip, build solid
CONS
seem a bit tight fit, when placing it on top a e-tank, could be larger then 510 size. don't know just hard to place it into 510 opening
nice and something to use, plastic good solid they use for it, style of it nice!
Reviewed on

Bill6565
Verified

VERIFIED OWNER
  • JoinedFeb 2014
  • Posts 145
  • Reviews 74
  • Kudos25
Overall   (4.0)
› Quality
› Value
PROS
runs get the clock & date works ok watts & voltage ok really fogs nice
CONS
only thing is a bag i see when in use see ether watts & voltage by holding your hand by chance you press - or + just by vaping they will chance as you use the unit to vape! i know using i have to be watchful were i place my fingers at! not near that screen - + are at!
ether way love this if not for that small bug on full manual screen were everything is shown on!
Reviewed on

Bill6565
Verified

VERIFIED OWNER
  • JoinedFeb 2014
  • Posts 145
  • Reviews 74
  • Kudos25
Overall   (0.5)
› Quality
› Value
PROS
work great use it for 4x then it fallen apart
CONS
housing connection male USB cover fallen off showing the wire underneath it
would i tell my best friend to buy it, no way the male USB connection covers on will sooner or later come off or break away! leaving the plate and wire showing! could even short out the wires in it! if they use rubber modded housig to cover the USB connection would have been better, but they didn't they use cheap mmodded plastic to cover male connection wires Male USB connection>>>>"wire solider on" cover pop-off >>>> cable to USB port>>>
Reviewed on