shopping cart empty
Corpsebutter's Product Reviews
Sort:
Authentic Desire RAGE 155W TC VW APV Squonk Box Mod
Authentic Desire RAGE 155W TC VW APV Squonk Box Mod

Corpsebutter
Member

VERIFIED OWNER
  • JoinedAug 2016
  • Posts 167
  • Reviews 18
  • Kudos71
Overall   (4.2)
› Quality
› Value
1 of 1 people found the following review helpful
PROS
pretty much everything
CONS
red color bleeds when exposed to juice
been using this non-stop since i got it, love the device, i find the shape comfy and have 0 issues squonking like some that have reviewed it. the thing i noticed though was after a day of use i went to wipe the top off and noticed the paper towel had turned pink from the color bleeding off the mod, also found the squonk bottle all pink as well. my concern is if its leaking onto the bottle then i feel there's a chance it can get inside too, and im not sure i want to be vaping red paint.
Reviewed on Was this review helpful to you? Yes / No
Authentic GeekVape 316L Stainless Steel Caterpillar Track Heating Wire for RBA Atomizer
Authentic GeekVape 316L Stainless Steel Caterpillar Track Heating Wire for RBA Atomizer

Corpsebutter
Member

VERIFIED OWNER
  • JoinedAug 2016
  • Posts 167
  • Reviews 18
  • Kudos71
Overall   (5.0)
› Quality
› Value
1 of 1 people found the following review helpful
PROS
Tastes clean, easy to build with, clean wires.
CONS
I stripped the wire open to see, 3 core wires were parallel while the 4th was resting under, not a huge con but i thought that should be mentioned.
Favorite wire I've tried so far, tastes amazing and clean and makes a beautiful paralleled coil with 3 wraps and a 26+30 ss clapton starting and ending on the outside of the 3 wraps. Comes to about .17 ohms i believe, i could be wrong. Also this build looks clean, the catterpillar's height matches the clapton making it level all across.
Reviewed on Was this review helpful to you? Yes / No

Corpsebutter
Member

VERIFIED OWNER
  • JoinedAug 2016
  • Posts 167
  • Reviews 18
  • Kudos71
Overall   (4.7)
› Quality
› Value
1 of 1 people found the following review helpful
PROS
Cheap. Seem pretty durable. Can grip 22mm tanks/RDAs. Comes with little blue screwdriver.
CONS
Felt slightly oily
Cut down on my coild build time, i used to spend up to 20 minutes struming and pinching out hot spots. Seem durable but the plastic isnt the stiffest, easy to make the tips not line up, with a bit of practice its no issue. Extra blue screwdriver, Who doesnt want more of those? Wash it, i was Dripping when i opened so it may have been juice, but it felt oily so id recommend giving it a rinse.
Reviewed on Was this review helpful to you? Yes / No
Authentic MKWS Kanthal A1 Juggeraut Heating Wire for RBA Atomizer
Authentic MKWS Kanthal A1 Juggeraut Heating Wire for RBA Atomizer

Corpsebutter
Member

VERIFIED OWNER
  • JoinedAug 2016
  • Posts 167
  • Reviews 18
  • Kudos71
Overall   (5.0)
› Quality
› Value
1 of 1 people found the following review helpful
PROS
Easy to coil Price Taste is amazing
CONS
None
I love this wire, I'm used to twisted and claptons but I found this easier to build a coil with. No spitting or popping, just clean vape. Will buy again!
Reviewed on Was this review helpful to you? Yes / No

Corpsebutter
Member

VERIFIED OWNER
  • JoinedAug 2016
  • Posts 167
  • Reviews 18
  • Kudos71
Overall   (5.0)
› Quality
› Value
1 of 1 people found the following review helpful
PROS
For the cost, its perfect
CONS
May need to adjust pin on atty to connect (if your center pin is adjustable)
Didn't even buy this for its intended purpose of being a heat sink, I just needed something to fit larger attys on my pico. But it also does its job killing the heat, tried it with my mutation x (clone) and ran a twisted 26g paralleled with a 28g kantal wire at .2 ohms @ 75 watts, its not even warm after chain vaping
Reviewed on Was this review helpful to you? Yes / No