shopping cart empty
ImCannibal's Product Reviews
Sort:
Authentic Serisvape Bathala Mechanical Mod
Authentic Serisvape Bathala Mechanical Mod

Avatar
ImCannibal
Member

VERIFIED OWNER
  • JoinedFeb 2018
  • Posts 46
  • Reviews 28
  • Kudos19
Overall   (4.0)
› Quality
› Value
4 of 4 people found the following review helpful
PROS
Price, Materials, Constant Contact Switch, Cerakote, Threading, Appearance
CONS
crunchy button
If you're trying to get a decent tube mech on a budget, this is right up there with some of the styled 21700 mech tubes but it's authentic and at the same price point. Full copper construction, constant contact switch, cerakoted body, decent esthetics. I only have 3 complaints, the bezel around the button is kinda sharp, and the engraving on the button material itself is a crud magnet, and the button is kinda crunchy. Overall, a decent mech for us penny pinchers out there.
Reviewed on Was this review helpful to you? Yes / No
SOB Styled RDA Rebuildable Dripping Atomizer
SOB Styled RDA Rebuildable Dripping Atomizer

Avatar
ImCannibal
Member

VERIFIED OWNER
  • JoinedFeb 2018
  • Posts 46
  • Reviews 28
  • Kudos19
Overall   (3.0)
› Quality
› Value
2 of 2 people found the following review helpful
PROS
price, tons of build space
CONS
parts fitment, airflow, looks cheap,
You know that truck your friend had when you were a teenager that seemed to be on the verge of falling apart but always got you where you needed to go? This RDA is like that truck. The build quality is awful, the positive AND negative terminals wobble no matter how much you tighten them. Adjustable airflow? Nah, you don't need to adjust your airflow bud, you just leave it WIDE OPEN for clouds-bro-clouds action. Will this stealth vape? No way bud, clouds-bro-clouds. Will the chuff cap get hot? No, its paper thin plastic, you'll know it got hot when it cracks. Will it fit 4mm coils? Oh yeah, brother. Will it look like the cheapest piece of vape gear you own? Most definitely.
Reviewed on Was this review helpful to you? Yes / No
SOB Styled RDA Rebuildable Dripping Atomizer
SOB Styled RDA Rebuildable Dripping Atomizer

Avatar
ImCannibal
Member

VERIFIED OWNER
  • JoinedFeb 2018
  • Posts 46
  • Reviews 28
  • Kudos19
Overall   (3.0)
› Quality
› Value
1 of 1 people found the following review helpful
PROS
price, looks, purpose
CONS
negative post
I have 2 of these, the solid POM topcap and this "gold" cap one. Both have wobbly negative posts no matter how much you tighten the screw holding it in. That said, if you are specifically looking for a cheap atomizer to build for a cloud comp or need monster airflow for a parallel/series mech, this SOB Styled isn't the worst you could do for a few bucks.
Reviewed on Was this review helpful to you? Yes / No
Authentic Skullvape POM Bell Cap for Oumier Wasp Nano RDTA (2-Pack)
Authentic Skullvape POM Bell Cap for Oumier Wasp Nano RDTA (2-Pack)

Avatar
ImCannibal
Member

VERIFIED OWNER
  • JoinedFeb 2018
  • Posts 46
  • Reviews 28
  • Kudos19
Overall   (2.5)
› Quality
› Value
1 of 1 people found the following review helpful
PROS
sturdy material, looks good,
CONS
fitment
TL;DR You have to put floss under the o-rings of your nano variants(authentic and styled) if you want these caps to stay on. FT also gave me an unsolicited warranty refund. These fit too loosely on both the styled and authentic Wasp Nano variants. Not loose enough that a fatter o-ring will fix it, and not tight enough to stay put on the atty. The OD of an authentic Wasp Nano RDA is 0.785", while the OD of the o-ring grooves is 0.730" and the o-rings are 0.035" thick and very malleable being silicone (these measurements, surprisingly, showed to be the same for the o-ring grooves on the styled rdta 9673226 and a clone Nano rda from elsewhere which use plain rubber o-rings of the same size). The ID of the Skullvape Bell Caps are 0.810". Meaning: there is a 0.010" gap (+/- a thou) between the factory o-rings of an authentic Wasp Nano RDA and the Skullvape Bellcaps, which if I realllllly wanted to ham fist I could use the old mechanics trick for fuel injector o-rings and put some floss under the o-rings. That isn't what I paid for though, I paid for caps that are supposed to fit right out of the box, which they don't. That's somewhat of a petty nitpick on my part for such an inexpensive set of topcaps, however it is still the truth. My previous review was rejected "because it conflicts with one or more of the review writing guidelines", which I have now amended with more detail in order to assist other potential consumers in making an informed decision prior to purchasing. FT also offered me a warranty refund for the items after I made a ticket to inquire about replacement o-rings to make these fit (instead of just giving me an o-ring sku).
Reviewed on Was this review helpful to you? Yes / No
JuggerKnot Styled RTA Rebuildable Tank Atomizer
JuggerKnot Styled RTA Rebuildable Tank Atomizer

Avatar
ImCannibal
Member

VERIFIED OWNER
  • JoinedFeb 2018
  • Posts 46
  • Reviews 28
  • Kudos19
Overall   (5.0)
› Quality
› Value
1 of 1 people found the following review helpful
PROS
price, build quality, threads, flavor
CONS
whistles, filling
I dont know why I thought this would be smaller than a zeus dual... its bigger, quite a bit bigger. Filling this thing can be fiddly, and its nearly impossible to have a clean fill so keep a towel/napkin/cloth handy to wipe down the ring after you close the juice fill ring. Easy to build on in both dual coil and monster single coil. Whistles a little but that can be mostly mitigated by closing the af ring a teeny tiny amount. Overall, I would buy again if my current one ever got lost or (very unlikely) broke.
Reviewed on Was this review helpful to you? Yes / No