shopping cart empty
Jonsin's Product Reviews
Sort:

Avatar
Jonsin
Member

VERIFIED OWNER
  • JoinedSep 2014
  • Posts 929
  • Reviews 18
  • Kudos383
Overall   (4.5)
› Quality
› Value
0 of 1 people found the following review helpful
PROS
-threads are fine -processing quality are good -blue screwdriver useable this time
CONS
-Airflow to tight -510 foot way too long
I bought this one to use it on my black hollow out mod. The overall build quality is good. Everything snaps in as it should. One thing i don´t like is the useless Airflow control. Even on biggest hole its too tight. But this is the same on the original magma rda.For people who like the typical RDA Airflow, this will be the wrong RDA. Another thing what can cause problems on some Mods is the very long 510 connection foot. Without adjustable positive and negative pins it will not fit on many mods without leaving a big gap. and of course the blue screwdriver push this RDA up xD
Reviewed on Was this review helpful to you? Yes / No
18650 Hollow-out Mechanical Mod
18650 Hollow-out Mechanical Mod

Avatar
Jonsin
Member

VERIFIED OWNER
  • JoinedSep 2014
  • Posts 929
  • Reviews 18
  • Kudos383
Overall   (5.0)
› Quality
› Value
0 of 1 people found the following review helpful
PROS
-Looks very nice -heavy feeling -very good build quality -comes with magnet switch instead spring loaded
CONS
nothing found
So finally my first Mech Mod arrives. I loaded it up with a 18560 Sony and a Taifun GT. Looks great and the build Quality is superior. Dont know about the original but i dont see any point which could be better. With the Taifun loaded its a very heavy build. So make sure you have a good belt on your pants xD. I would strictly recommend it as a build also Womens. This thing can serve as Vaping machine and also as a sledge Hammer for self defense. The switch works well and it kicks like a horse. The Copper contacts are good. The thread well manufactured. I put some gunoil on it so its works silent and smells like a new AR. Delivery to Germany was under 10 Work Days. So thank you Fasttech.
Reviewed on Was this review helpful to you? Yes / No

Avatar
Jonsin
Member

VERIFIED OWNER
  • JoinedSep 2014
  • Posts 929
  • Reviews 18
  • Kudos383
Overall   (2.5)
› Quality
› Value
0 of 2 people found the following review helpful
PROS
-looks good -Machining is ok -Vape and taste kayfun like, nothing special. -easy to build -easy to fill
CONS
-Post screws has wrong heads. They are not total even under the head. Trying to tighten up the thin Kantal from the Package is not possible. It will be loose again after a little bit moving. AVG 28 is ok. -The Package include an Acryl Drip Tip which dont fit in the Bellcap. I tried several O rings and its simply to big. -The Bellcap smells. It needs some cleaning. Also the other parts before use -no tool in package for adjusting airflow. -Atomizer foot is very long. The Pin screw can not move in further, so it stays 2mm above the foot. Could be a Problem with a Mod without floating pin. On the itaste SVD it fits if using a little bit power to screw in.
Its Ok for the price. Even i am a little bit angry about the Drip tip which dont fit.
Reviewed on Was this review helpful to you? Yes / No