Puff_Cabby's Product Reviews
Sort:

Avatar
Puff_Cabby
Verified

VERIFIED OWNER
  • JoinedMay 2014
  • Posts 7453
  • Reviews 48
  • Kudos3894
Overall   (4.7)
› Quality
› Value
PROS
Build No Leaks Easy Build 2 drip tip options 2 glass options Form factor Good spares pack Has the door seal
CONS
Door may break with use Refill holes too small
I thought I had a duff one, as I tightened up the coil the wrench rounded on me leaving me thinking the screws had rounded off, glad to say it was the wrench and not the screws, The atty itself is well made, I stripped mine back and gave them 20 mins in the false teeth cleaner to ensure all factory traces would be steralised out of it, Blows great clouds, not quite as flavourful as the 22mm versions but still good, I prefer mine about 3/4 open, full open totals the taste, filling holes are too small, Tips for you, don't use the door fill it through the core side holes if you single coil it, set your coil in the middle so it's height is like an H between the posts, set your cotton to hang just in the tank, $10, bargain.
Reviewed on
UD 316L Stainless Steel Resistance Wire for Rebuildable Atomizers
UD 316L Stainless Steel Resistance Wire for Rebuildable Atomizers

Avatar
Puff_Cabby
Verified

VERIFIED OWNER
  • JoinedMay 2014
  • Posts 7453
  • Reviews 48
  • Kudos3894
Overall   (5.0)
› Quality
› Value
PROS
Clean
This wire is soft, a lot softer than Kanthal, Taste wise I can't really tell tbh, I did 9 wraps x2 on a 3mm in a dual coil RDA and it came out at 0.39ohms, Is it better than any other SS? I doubt it, is it worth trying out? I#d say yeah.
Reviewed on

Avatar
Puff_Cabby
Verified

VERIFIED OWNER
  • JoinedMay 2014
  • Posts 7453
  • Reviews 48
  • Kudos3894
Overall   (2.0)
› Quality
› Value
PROS
Cheap rebuildable into something better
CONS
Pants in standard build
These arrived and I suspect they are actually Kanger redundant stock, arrived in condoms and in a zip bag, branded on the coils as Kanger, However as they appear to be V2 coils of the Aerotank coil they are constant dry hitting @ 3.6V and have much the same qualities that any Aerotank coil has, bad taste, burnt taste, plenty of vapor though, Maybe sitting them in a marionation tank for a day may help break them in to fully absorb liquid but for me these are a no no as a repeat buy, I tried a re-build and got a 1.4ohm coil but it's tricky, I destroyed the chimney getting it off and even after lining the new coil up cottoning it and that destroyed any airflow through it, I think these could be a goer for vertical coils though if I can master making them properly, This is no reflection on fastech btw, shipping to the UK took 4 weeks as normal, Update I've now rebuilt one properly and it's puffing like a champ, as most vendors who have insulators only for sale are ransoming the insulators these are a far better idea if you rebuild.
Reviewed on

Avatar
Puff_Cabby
Verified

VERIFIED OWNER
  • JoinedMay 2014
  • Posts 7453
  • Reviews 48
  • Kudos3894
Overall   (3.5)
› Quality
› Value
PROS
Nice looker It's all there bar a few glaring flaws
This should've been a great atty, sadly it isn't, here's why, Once filled the juice turns it into a sloppy fall apart unit, the driptip isn't secure, the body goes loose when the juice slops back out of the fill port and gels the seals up, the top cap does the same thing, I'll be modding it with authentic seals soon and see if that fixes it, really fine atty let down by a few microns of rubber.
Reviewed on

Avatar
Puff_Cabby
Verified

VERIFIED OWNER
  • JoinedMay 2014
  • Posts 7453
  • Reviews 48
  • Kudos3894
Overall   (5.0)
› Quality
› Value
PROS
Precise
Makes getting a coil tidy easy
Reviewed on