SL3RR1620's Product Reviews
Sort:
Thunderhead Creations Tauren 18650/20700/21700 Mechanical Mod
Thunderhead Creations Tauren 18650/20700/21700 Mechanical Mod

SL3RR1620
Verified

VERIFIED OWNER
  • JoinedSep 2017
  • Posts 6
  • Reviews 13
  • Kudos1
Overall   (5.0)
› Quality
› Value
PROS
Continuity! Size, paint, safety, price, packaging, looks Tauren is on top in the mech department for me right now
CONS
Let’s see they could of put a little pack of that jelly in with mod. But actually works fine with out. Still hits like a train and doesn’t rattle
Yeah boy, this guy is good. Paint is nice and strong, with a rugged feel that smoothes down nicely over time. Did chip some but I’ve been using this thing about a year now and dropped a bunch. Bought an extra switch cause I plan on using this um possibly forever. Bought his brother (max) cause I like ‘em so much. Hardest hitter I’ve seen/owned. Better IMO than the max. 40 American with MAP is hard to beat for any authentic mech and I’d bet it hits harder than the others. It has a plasti spring loaded disk inside where the 510 hybrid for safety. Oh yeah this guy is small for a 20700. Only taller than my ijoy 24k ultra. I love it best mech on the market I’m my opinion. I own this, the max, rda, rdta and have a solo on the way... yeah I’m a fan. Some say ball bearing in switch rattles without conductive jell but hasn’t been my experience and I removed mine awhile back. Everything has been quality and all well packaged plus vacuum sealed. Though customs in Cali cut the vacuum on one of my mods cant remember if it was this or max. No matter, Tauren is legit my vaper dudes. Enjoy!
Reviewed on
Thunderhead Creations Tauren Max Mechanical Mod
Thunderhead Creations Tauren Max Mechanical Mod

SL3RR1620
Verified

VERIFIED OWNER
  • JoinedSep 2017
  • Posts 6
  • Reviews 13
  • Kudos1
Overall   (5.0)
› Quality
› Value
PROS
Build quality Paint and finish Small volt drop Locking switch Looks
CONS
not really Um they don’t offer a copper switch ....serial number on front
Ok I love this thing, it is really only second (in my opinion) to it brother the copper tauren (non-max). Better than broadside. Just better. These bros hit my guys. I almost exclusively use this and his bro for daily use. The switch work marvelously and locks when screwed in which is nice. Only brass locking switches for this mech, but they’re cross compatible with the other mech. When I use the max I use the lock switch cause it looks better and sag is so small. Just saying they’re swapable. Ok the looks, I’d prefer that gold badge just not be there or just milled like brother. The paint looks like car body paint with slight, small silver flake. The silver is not over bearing and doesn’t look bad, but silver flake on a painted brass mod seems like a bad call looking back lol. It still looks sharp. It looks like it belongs next to a Ferrari. The paint is strong and has held up to several drops with only one small chip in it. I will buy another. If you use mechs and have not tried Tauren dude use map on either one. You wont regret it. Did I mention that both switches are bad ass? Stop reading and add one already.
Reviewed on

SL3RR1620
Verified

VERIFIED OWNER
  • JoinedSep 2017
  • Posts 6
  • Reviews 13
  • Kudos1
Overall   (4.0)
› Quality
› Value
PROS
Nice brass rda Works great Air flow - see cons Juice well is deep
CONS
I filed some of the sharp edges down Better for squonk than dripper
I polished the brass bell right away to match a touren mech. I like this thing flavor is good. Air flow is a cool design really the prob I have with this thing is the way airflow is designed, if someone was to put a 2.5 or bigger coil in this tho and drip it. The juice will just flow right out the airflow and never make it to the well. It would work just fine as squonk prob. Idk never used it that way, just wanted as a dripper. Too bad for me. It is a decent rda tho
Reviewed on

SL3RR1620
Verified

VERIFIED OWNER
  • JoinedSep 2017
  • Posts 6
  • Reviews 13
  • Kudos1
Overall   (4.5)
› Quality
› Value
PROS
Prob wrapped 10 bats and still plenty left Strong/ holds up Cheap
CONS
Obviously you have to cut it too length 20700 are a no go
Nice white heat shrink for 18650. Is... kinda transparent, also sharpie won’t rub off of this easily. It’s thicker than some of the graphic wraps that I payed $1 a piece for but not the thickest. For the price well worth it. I personally feel like anyone who uses and swaps batteries, extra wraps are a must for safety. These work just fine... so do others. In a pinch or if I wanted white again, I’d buy these Oh and obviously you gotta cut it
Reviewed on

SL3RR1620
Verified

VERIFIED OWNER
  • JoinedSep 2017
  • Posts 6
  • Reviews 13
  • Kudos1
Overall   (3.2)
› Quality
› Value
PROS
Real nice rda This guy is solid Holds 18650 and 20700
CONS
It’s heavy. Too heavy for myself The button on top is crunchy and can be finicky if not cleaned up. Burs on a lot of edges to clean up. Brass colors don’t match from mech to rda.
Button is a pain. Plastic fell off button right away, it got glued back on. Only used a handful of times. Oh and it is a handful, it’s heavy. Works like a mech and doesn’t blow up but man if you go for this, take it apart and check it. I could easily see where this could short. Squonk works, bottles good and pos pin is adjustable. I had to drop it way down right off so I could fit rda. Again concerning me about shorts. Ps any short that connects pos side to neg side without going thru atty is a bad fucking deal. Use at your own risk, mine is useable and safe after looking over, but I could easily see this thing being dangerous. More volt drop than I’d like on this too. It’s cool looking clone Nice rda with both pins Very cheap both in price and build Buyer beware
Reviewed on