shopping cart empty
ShelaghStone's Product Reviews
Sort:
DOVPO Safe Link for Mechanical Mod and Atomizer
DOVPO Safe Link for Mechanical Mod and Atomizer

Avatar
ShelaghStone
Member

VERIFIED OWNER
  • JoinedJan 2015
  • Posts 32767
  • Reviews 189
  • Kudos23171
Overall   (5.0)
› Quality
› Value
3 of 14 people found the following review helpful
PROS
Great for new rebuilders Great for those that new to mech mods Not a bad Price. Comes very nicely packaged-perfectly safe for transport package can be used to hold attys when rebuilding
This is best for those new to mech mods as well as rebuilding them. You may not use it for long, once you feel comfortable with your safety but once you do have it, you will use it forever to check your battery, voltage, ohms, etc; and when you feel sure that your new build is fine, take it off, put it away until the next build, or the next time you wish to quickly check everything out to make sure that you are safe. I dont personally think that expert rebuilders and those already familiar with using mech mods will need to use one of these, although if you have one, you will find it useful at times as well. The package it comes in is can actually be used for rebuilding. It will hold that atty in place perfectly.
Reviewed on Was this review helpful to you? Yes / No
Protective Silicone Sleeve for Eleaf iStick 50W VV/VW Mod
Protective Silicone Sleeve for Eleaf iStick 50W VV/VW Mod

Avatar
ShelaghStone
Member

VERIFIED OWNER
  • JoinedJan 2015
  • Posts 32767
  • Reviews 189
  • Kudos23171
Overall   (5.0)
› Quality
› Value
5 of 18 people found the following review helpful
PROS
- Great Price - Fiths 100% perfectly - No Flaws whatsoever - A No Brainer. - Provides a better grip than the iStick itself
All Pros, no Cons. A No Brainer. Just Buy it. You cant go wrong! Fits perfectly. In fact it is so perfect I really dont have anything to say or add. No thought is needed with regards to purchasing this item. If you own an iStick 50 watt or a couple as i do, theres no reason not to buy this.
Reviewed on Was this review helpful to you? Yes / No
Pure Nickel Ni200 Pre-Coiled Resistance Wire for Rebuildable Atomizers (50-Pack)
Pure Nickel Ni200 Pre-Coiled Resistance Wire for Rebuildable Atomizers (50-Pack)

Avatar
ShelaghStone
Member

VERIFIED OWNER
  • JoinedJan 2015
  • Posts 32767
  • Reviews 189
  • Kudos23171
Overall   (5.0)
› Quality
› Value
3 of 15 people found the following review helpful
PROS
Very Easy to Deal with Ohms stay Relatively the Same Great Price
Let me Preface this by stating I personally hate Chinese Kanathal wire. I will not use it. As a chaser of flavour, not clouds, my taste buds are pretty intune to the taste of my juice, so I am able to taste anything that should not be there, pretty quickly. At the point of this review, I have been using this coil at 300F and no metallic taste yet. If I can use these for a minimum of 48 hours, then they will be worth it for me. If I have to change them out every 48 hours, the price of these coils still make it worth the purchase for me. I will post back on a second review IF they do not hold up at least those first 48 hours. But most people don't have a problem with Chinese wire and if not, this is a great little deal. At 3.0mm they are a wee bit bigger than I prefer to use in a Goliath v2 tank but I fit them in although just barely so. You cant beat the price. I love Ni200 but I find rebuilding Nickel coils to be so finicky that I cant be bothered. I gave it a full 2 months and got tired of the resistance jumping back and forth, although, admittedly I was mainly using a Kanger Subtank whose RDA is notoriously difficult when it comes to the legs of Nickel coils. These coils are definitely much easier to deal with then rebuilding ones own unless you wish to take it as far as ensuring the legs of ones coils ave twisted, doubled up, or some such action one takes, to make them stronger and less likely to have the resistance jumping. So the Short Answer? If you want a Simple Easy NI200 coil for dual coil decks, this one does not fail and is really quite enjoyable!
Reviewed on Was this review helpful to you? Yes / No
Authentic UD Goliath V2 RTA Rebuildable Tank Atomizer
Authentic UD Goliath V2 RTA Rebuildable Tank Atomizer

Avatar
ShelaghStone
Member

VERIFIED OWNER
  • JoinedJan 2015
  • Posts 32767
  • Reviews 189
  • Kudos23171
Overall   (5.0)
› Quality
› Value
8 of 25 people found the following review helpful
PROS
Love it Love it Love it But be sure you know how to wick properly if this will be ur main atty
One thing I have noticed in some reviews and comments. People noticing that the chimney sometimes comes loose from the base, allowing it to flood. Yes, that can happen. I have personally found that this is an atty you MUST carefully look at when it first arrives. Most importantly understand how the chimney fits into the two juice control parts/rings. It just doesn't go in any old way. Look at the side of the chimney base and you'll see its not 100% round but has two flat parts. Take note of where they sit best when it arrives. Not sure but I think some might not be putting it in correctly and later when twisting and turning the juice channels, which are a bit tighter than I would prefer them to be, I think it can eventually turn the base on that chimney, coming away, causing juice to flow into the coils. Likely user error more than a grand flaw perhaps? Study the chimney and those 2 mid parts for that is the basis of this atty and once u recognize how it's meant to fit together at that junction, you will deal with it much easier. I say this as someone who opens them up when i first get them and forever forgets to study them myself and then has to spend time later on making sure of the exact right spot they are meant to fit. Could save yourself some time if you are like me in this regard, later on. Wicking? Easy Peasy. Simply cut your wicks around the deck so they are not long but no longer than the deck. In my experience, placing them IN the channels leads to leaks but just cutting them short enough so the ends sit right on top of the channel, just touching it, means that the juice will just roll right off of it and down the chimney. Sometimes, if i find its a bit thick so the chimney wont go down as easily over top, some will trim them diagonally from the top but i prefer to fold them under a bit, onto the deck and where the fold over part is located, sits right on top of the juice channel so again, the juice runs right off of the cotton and down the channels. If I do fold them under, on to the deck as last resort, they will still be short enough that they likely wont stay put but once i put the juice on the wicks they will stay in place, tucked under so the chimney will go on easily BUT never under so far that they cover the air holes. Just slightly under, juiced, and they will stick and stay but even if they do fall out, they are still short enough that they rest just around the top of the juice channels, not into them.. Think when a newbie or first tie to it, people might make it more complicated than it really is but once u have it, u will always be able to use attys without leaking. And then they are phenomenal to vape on. So, remember to look at it all very carefully as you first break it down but notice the two flat parts on the bottom of the chimney base and remember where they sit, once inside with the two round thingies around it, before putting on the glass and top etc. if placed properly, it also helps the juice channels to turn easier. so if not turning too easily, u might want to look at your chimney replacement, at least IMO
Reviewed on Was this review helpful to you? Yes / No
HOWING Kanthail A1 Twisted Wire Coil w/ Organic Cotton for Rebuildable Atomizers
HOWING Kanthail A1 Twisted Wire Coil w/ Organic Cotton for Rebuildable Atomizers

Avatar
ShelaghStone
Member

VERIFIED OWNER
  • JoinedJan 2015
  • Posts 32767
  • Reviews 189
  • Kudos23171
Overall   (5.0)
› Quality
› Value
3 of 15 people found the following review helpful
PROS
Well Made Priced well
These are priced as well as they have been made. Thought I would try them out, purchased and if I liked them, then perhaps Id make my own, but as it turns out, they are priced well enough so there is little need to make them but buy them instead. I don't personally notice any improvement in flavour. I am not a cloudzbro so it was important to me that the flavour increase, but not once have I found it doing so. It does however provide a good and strong coil for RDAs and for that I would consider using/buying them again.
Reviewed on Was this review helpful to you? Yes / No