Some1's Product Reviews
Sort:

Avatar
Some1
Verified

VERIFIED OWNER
  • JoinedApr 2014
  • Posts 21
  • Reviews 6
  • Kudos3
Overall   (5.0)
› Quality
› Value
PROS
7 ml capacity Improved airflow Finger grip on RBA deck O-rings included Extra Glass piece for tank included Detailed instructions Improved connection pin
CONS
Some popping during slow draw Hotter vapor than original so far (experimenting further)
Got my new subtank PLUS. Already a happy owner of the original subtank, I chose to get the Subtank Plus for its improved airflow and rba design, we well as its larger capacity. There is no airtube/post change when switching from factory made coil to RBA like there is in the original subtank, and therefore, you get 7 full ml when using RBA deck as well (unlike the original which holds 4.2ml on rba, 6ml on factory made). Really nice unit. Just like the original Subtank, no leaks! The Subtank Pro seems to fit even more snug onto the o-rings than the original. One complication I'm having that I hope to change is that the heat of the vapor is higher, especially after just a bit of chain vaping. Tank stays cool but drip tip and vapor heats up faster than the original, much faster. Other than that, I'm very happy with this Subtank Plus ! Clouds, clouds ! Beware, this thing takes a lot of juice. Even a bit more than the original it seems, but maybe that's cuz I'm vaping it a bit more to test it out. Going back and forth between original and plus, to differenitate the two. The connecting pin has been improved also, no longer a tiny cylinder with spring action, a nice solid piece which comes out of the atty a bit, perfect. Great connection every time, unlike the original which would not fire on one of my APV's, the one I'm using now for the Plus (E-LVT Mini). I highly recommend this unit for anyone looking for leakfree action, cloud action, and taste. It's also a great way to get introduced to rebuildables. However I must say, this new plus has even a smaller deck to build on, so it might pose a challenge for new users. It didn't for me, the Subtank was my introdcution to RBA life. Comes with one 0.5ohm factory coil and one 0.5 ohm RBA head. Get yours today !
Reviewed on

Avatar
Some1
Verified

VERIFIED OWNER
  • JoinedApr 2014
  • Posts 21
  • Reviews 6
  • Kudos3
Overall   (5.0)
› Quality
› Value
PROS
Portable Economic All-ceramic coil 510 fitted Rebuildable
CONS
Clogs without maintenance
...I ordered these this time hoping it was the shallow bowl. They are deep. Still looking for shallow. However, this unit is really handy. Originally commissioned by Matt Macosko for Divine Tribe, later copied by Atmos, Velvet Hammer, and many other brands. This is equal to the competition at a fraction of the cost. There are two types, shallow bowl and deep bowl. I was getting the shallow bowl with this type but last shipment got the deep bowls. This time ordered black with glass because they look like shallow bowls. However, they are deep. Otherwise not sure what the different 'types' are all about (B,C). Do not overload this unit. Insert one 'dab' at a time, about the size of a BB. Do not touch the donut (coil) with tools. Inhale on the unit after your use, to clear the air intake holes. Do not use more than 17 watts on this device. To prolong life, start a new unit at 15 watts for a few uses, then up to 17. This device is not really rebuildable easily. It's possible, but most likely the coils will cost you about the same as a new unit. Also the hassle of cleaning and assembling. I buy 5 at a time. This unit will last 2 weeks to 1 month generally. There are some exceptions. Less wattage will prolong life. To clean, heat up unit with 510 mod, while blowing on donut. Then place your lips on air intake and blow gently until there is no more vapor. Again heat while blowing on coil. It should return to white. Caution, if you overload this or use particularly runny material, there IS a hole in the 510 fitting on this unit that WILL leak material. This generally happens with watery substances or if you overload it. Eventually it's bound to happen as the unit fills with some reclaim. Do not use too much, and vape all you put in before adding more. All that said, many times I prefer using this unit to a dab rig because I can control the amount of vapor and the taste is great, being that the coil is pure ceramic. I highly recommend this unit. Very pleased. Such a deal on FastTech ! However there has been a recent price increase. Get these while you can !
Reviewed on

Avatar
Some1
Verified

VERIFIED OWNER
  • JoinedApr 2014
  • Posts 21
  • Reviews 6
  • Kudos3
Overall   (5.0)
› Quality
› Value
PROS
Ceramic coil 510 fitting Efficient Stays cool
CONS
Only lasts 2 weeks to 1 month (but hey it's cheap) Clogs without dry-hitting it as it cools
Great little device. Originally commissioned by Matt Macosko for Divine Tribe, later copied by Atmos. This is equal to or better than the Atmos kiln at a fraction of the cost. There are two types, shallow bowl and deep bowl. I was getting the shallow bowl with this type but last shipment got the deep bowls. This time ordered black with glass because they look like shallow bowls. Otherwise not sure what the different 'types' are all about (B,C). Do not overload this unit. Insert one 'dab' at a time, about the size of a BB. Do not touch the donut (coil) with tools. Inhale on the unit after your use, to clear the air intake holes. Do not use more than 20 watts on this device. To prolong life, start a new unit at 15 watts for a few uses, then up to 17, then finally to the limit at 20 watts. This device is not really rebuildable easily. It's possible, but most likely the coils will cost you about the same as a new unit. Also the hassle of cleaning and assembling. I buy 5 at a time. This unit will last 2 weeks to 1 month generally. There are some exceptions. Less wattage will prolong life. To clean, heat up unit with 510 mod, while blowing on donut. Then place your lips on air intake and blow gently until there is no more vapor. Again heat while blowing on coil. It should return to white. Caution, if you overload this or use particularly runny material, there IS a hole in the 510 fitting on this unit that WILL leak material. This generally happens with watery substances or if you overload it. Eventually it's bound to happen as the unit fills with some reclaim. Do not use too much, and vape all you put in before adding more. All that said, many times I prefer using this unit to a dab rig because I can control the amount of vapor and the taste is great, being that the coil is pure ceramic. I highly recommend this unit. Is it 7:10 yet ?
Reviewed on

Avatar
Some1
Verified

VERIFIED OWNER
  • JoinedApr 2014
  • Posts 21
  • Reviews 6
  • Kudos3
Overall   (5.0)
› Quality
› Value
PROS
Top-Fill Large Airflow Standard Drip Tip No Leaks
CONS
Pin Needed Adjustment Drip Tip Airflow Frozen
Well folks, If you see my previous review, I mentioned that this unit wouldn't fire right out of the box. Well I adjusted the firing pin easily and now it works fine. The Dovpo Esmog is a top-filling Atlantis-Style atomzier, with drip tip airflow. It takes Atlantis or Atlantis-styled coils such as what I use, the Sega Anyvape V-2, it turns this unit into an RBA/RTA (rebuildable coil). Out of the box, it wouldn't fire, but a simple firing pin adjustment fixed that situation. No leaks, and the airflow o-rings stay in place. Nice system. Easy to unscrew the top to fill, yet totally leakproof. NO liquid makes it into my drip tip or my hands. Dovpo essentially made a top-filling Atlantis V-2 here. The heads (which hold the coil) are interchangeable with Atlantis heads. It comes with a 0.3 ohm coil and an 0.5 ohm coil. Atlantis coil clones, exact replicas. Doubt they are organic cotton however, like the new Atlantis coils are. How to tell ? The new Atlantis coils which ARE cotton, have on the back label printed a statement about soaking your cotton thoroughly before use. Those are cotton. I'm pretty happy with this unit, and for the price, it's definitely a better option than an Atlantis V-2. Works about the same. Sadly, my unit came with a frozen drip tip that I haven't been able to move. No worries however, because this atomizer, UNLIKE the Atlatnis v-2, takes standard drip tip sizes. So, I just threw on an adjustable airflow drip tip onto it , and boom. Got it. A basic atomizer for pros and beginners alike. I always recommend using Sega Anyvape V-2 coils in these, so you can build your own coils. Warning, it's a small deck, but you can handle it. Thanks FastTech, you stocked another winner here.
Reviewed on

Avatar
Some1
Verified

VERIFIED OWNER
  • JoinedApr 2014
  • Posts 21
  • Reviews 6
  • Kudos3
Overall   (3.5)
› Quality
› Value
PROS
Top-filling Fits atlantis cores No leaks Interchangeable Drip Tip
CONS
Won't fire with Dovpo Head Drip Tip Airflow adjustment frozen
Well, the problem is, it just won't fire as it is out of the box. Tried both coils and a new Atlantis coil only to find that apparently the coil never actually touches the pin inside the bottom piece. So, not a total loss, as the Esmog and its glass fit perfectly on an Atlantis bottom piece. SO basically what I have now is an Atlantis with top-fill and RBA coil (using Sega Anyvape V2, fits perfect). It's a shame I can't use the bottom dual airflow that the Esmog offers, but I find complete ease of airlfow without it. Also, the adjustable drip tip with airflow is frozen in place at the closed position. Going to soak it in either iso or veg oil to try to free it up. For now, I like the fact I can use any drip tip I want, as the Esmog fits any normal drip tip size. I'm using a drip tip with airflow control that I got somewhere else, but find I don't need to open it often because the airflow is so awesome already. It's a V2 atlantis with a top-fill ! However you WILL need an Atlantis or Atlantis-clone bottom piece for this to work.
Reviewed on