This stuff is worth having in your wire arsenal. 3mm ID 3/4 wrap comes out to 0.2 ohms. Great for many of the latest single coil rta's. It'll ohm out to 0.1 - 0.12 neighborhood for duals with the same 3/4 wrap.

So as the pro shows Considering the price point for the Authentic Reload at $70.00 and how tough it can be to come by one, I'll give this lil Clone a 10 on my 1 to 10 scale for price. No matter the cons I have for this, one could do far worse. And of course as every review out there in Internet land will attest to. It's a easy to build on deck. This is a mesured out (with not pre lubing the coils) a 5ml juice tank (approx. 4.5ml if you've pre lubed the coils before filling). Looks good sitting on top of my Gboy too (pic provided name sku 9616403 ) Cons: Because of the design of the top cap, I can't stand the feel of it hitting me on the lips with the provided Goon tip. Solution! Taller 810 drip tip. I use the SKU 9388011 Smoktech SMOK Resin Drip Tip for TFV12 Prince. As stated in the con section. the edges of the top cap are sharp so be careful if you have soft hands and skin. The biggest con I have is the grub screws. After first coil, they were done for. This of course is typical of most china made things, even in the brand named ones. Solution! Replaced them with SKU: 3981605 and no probs after. Now while I have listed some cons I will end by stating; if I wanted another or needed to replace the one I have would i buy it again. Answer: YES Flavor isn't as good as some of the hype given this rta. However it rates a 6 on my 1 to 10 scale. Not anywhere near as good as the Ammet or kylin or even a freemax fireluke, But it serves the purpose it was designed for.

As the title indicates. These are a good replacement Allen-head grub screw for the slotted head screws that come in the GeekVape Ammit Dual V2 RTA. Which to me is one of the cons of the GeekVape Ammit Dual V2 RTA. as is often the case, most stock screws are too soft a metal and thus, strip out quickly. You can't go wrong with these.

I am a Smoktech TFV8 Big baby beast fanboy. I wear the badge loud and proud around my neck of the woods. I decided to do a color matchy matchy thing with them (tank glass and mods match) and these Adaptors were the bomb for that too. I now have 2 of every colored offered and if I needed any more, yes I would buy them again.

I vape. I build coils. Ever had a set of tweezers and used them to pick up the small trimmed off pieces of wire from your coils and had to get into a clown fight like the tape one clowns do for entertainment purposes! Well these eliminates that! If you work on mod vw chips as well, these are a no brainer to have and use. You don't want to chance using a set of tweezers that can get magnetic on anything like a vw chip, be it a DNA or vamo chip or Yihie one. I got these, as well as the SKU: 1779300 straight one.