shopping cart empty
The4thpower3's Product Reviews
Sort:

The4thpower3
Member

VERIFIED OWNER
  • JoinedJul 2013
  • Posts 536
  • Reviews 125
  • Kudos1244
Overall   (5.0)
› Quality
› Value
4 of 4 people found the following review helpful
PROS
Adjustablility
So long as your Nem is properly threaded (20.5 x 0.5) these will work with any 510 atty. If the 510 pin on the atty protrudes - you don't even need to use the spacer. But the spacer can be used to adjust for battery length. If the 510 pin recesses - the spacer is needed; but got to make sure the small brass piece that threads into the delrin doesn't touch the 510 threads (might be a good idea to stick a thin little o-ring in between to prevent short) - then use the tiny screw to make the connection to the 510 pin. Some attys have a 510 connection that is long and doesn't have enough threading for the brass to hold on to - stick an o-ring on the 510 before putting on the brass adapter.
Reviewed on Was this review helpful to you? Yes / No

The4thpower3
Member

VERIFIED OWNER
  • JoinedJul 2013
  • Posts 536
  • Reviews 125
  • Kudos1244
Overall   (5.0)
› Quality
› Value
4 of 4 people found the following review helpful
PROS
Finer knurling, spare o-rings, draw tube.
I have this and the other FT version. Besides the parts this comes with and the finer knurling, I found that this versions topcap airtube does NOT stick in the chamber cap - which on the other model it does and causes the entire chamber to move/twist when screwing on the tank.
Reviewed on Was this review helpful to you? Yes / No

The4thpower3
Member

VERIFIED OWNER
  • JoinedJul 2013
  • Posts 536
  • Reviews 125
  • Kudos1244
Overall   (4.5)
› Quality
› Value
4 of 5 people found the following review helpful
PROS
Everyone knows :)
CONS
My SS top cap was pressed on the brass portion crooked. And I found some brass shavings in the switch.
I posted my pics and info here https://www.fasttech.com/forums/1632200/t/1184113/ft-stingray-breakdown-with-pics?1187521
Reviewed on Was this review helpful to you? Yes / No
High-Carbon Steel Support Springs for Flashlight DIY (10-Pack)
High-Carbon Steel Support Springs for Flashlight DIY (10-Pack)

The4thpower3
Member

VERIFIED OWNER
  • JoinedJul 2013
  • Posts 536
  • Reviews 125
  • Kudos1244
Overall   (5.0)
› Quality
› Value
2 of 2 people found the following review helpful
PROS
gold plated
CONS
big
I guess I didn't look at dimensions. I was hoping I could use these for ecig mods switch spring replacements, but they are too big. Oh well. Maybe I'll find some other use for them.
Reviewed on Was this review helpful to you? Yes / No
RG200 Bottom Coil Clearomizer (2ml)
RG200 Bottom Coil Clearomizer (2ml)

The4thpower3
Member

VERIFIED OWNER
  • JoinedJul 2013
  • Posts 536
  • Reviews 125
  • Kudos1244
Overall   (3.7)
› Quality
› Value
2 of 2 people found the following review helpful
PROS
glass tank
CONS
glass can shatter if dropped; the main airtube is press fit into the top cap - mine is pressed in a little crooked; needle point fill
I can hear the glass crunching when I screw everything together - maybe cuz my main airtube isn't perfectly straight and the glass is grinding against the metal since it sits a little cockeyed. I only have one; but I have another one coming - we'll see if it's the same. I'll post again. I suppose you could possibly fill this with a needle tip bottle; but it has 4 little holes in the base where the head inserts (not in the pics) that really needs a syringe to fill; so filling on the go will be a pain in the ass unless you have a needle point bottle (like a U-Can). It vapes like any other pro-tank style atty. Looks good on an ego. It's a polished finish that almost looks like chromed brass (but it says it's steel).
Reviewed on Was this review helpful to you? Yes / No