Wylie's Product Reviews
Sort:

Avatar
Wylie
Verified

VERIFIED OWNER
  • JoinedMay 2013
  • Posts 5968
  • Reviews 78
  • Kudos3873
Overall   (3.7)
› Quality
› Value
PROS
Easy to build on Decent air flow with no drilling Nice size for Ego style batteries Pretty good flavor production Two tear composition of the cap allows for easy builds and better liquid capacity.
CONS
lining up the three little air holes in dim lit situations. Not enough pictures posted here on FT
I'm pleased with this little dripper. I bedded a micro coil in cotton leaving only enough room around the coil for air to move over it and it's a real good vape.
Reviewed on

Avatar
Wylie
Verified

VERIFIED OWNER
  • JoinedMay 2013
  • Posts 5968
  • Reviews 78
  • Kudos3873
Overall   (3.0)
› Quality
› Value
Other than the top cap being very loose and build deck having no raised edges this is a good genny once the air hole is drilled larger.
Reviewed on

Avatar
Wylie
Verified

VERIFIED OWNER
  • JoinedMay 2013
  • Posts 5968
  • Reviews 78
  • Kudos3873
Overall   (4.0)
› Quality
› Value
These seem to be of decent quality although there is no air inlet for 510 based atomizers that take air in through the 510 connection.
Reviewed on

Avatar
Wylie
Verified

VERIFIED OWNER
  • JoinedMay 2013
  • Posts 5968
  • Reviews 78
  • Kudos3873
Overall   (4.5)
› Quality
› Value
It's a Trident without the lame cap screws that are so close to not catching threads. It has a deeper well for more liquid and wick, just drill holes of the right size in the right place. I swapped out the o-rings for some that work better too and this is now the best dripper I have.
Reviewed on

Avatar
Wylie
Verified

VERIFIED OWNER
  • JoinedMay 2013
  • Posts 5968
  • Reviews 78
  • Kudos3873
Overall   (2.5)
› Quality
› Value
PROS
Decent threading Stainless Steel Lock out ring for switch
CONS
Flimsy spring in the switch Tubes inner diameter too large for kick
Decent device although a few cheap changes by the manufacturer could make it much better IMO. The tubes inner diameters are just a little large for a kick to make electrical contact. I made a sleeve that allows for a kick. I removed the threaded parts from the cap for battery size adjustment and installed a spring so the device now self adjusts to the batteries installed. I also installer a stronger conical spring in the switch so the device does not fire when stood on the switch.
Reviewed on