shopping cart empty
YetiVapor's Product Reviews
Sort:

Avatar
YetiVapor
Member

VERIFIED OWNER
  • JoinedApr 2014
  • Posts 1430
  • Reviews 98
  • Kudos1055
Overall   (4.2)
› Quality
› Value
2 of 2 people found the following review helpful
PROS
Easy to use Decent quality
CONS
Fugly IMO Too tall Fill holes are very small O-ring is a bit too high
Doesn't make a great seal with stock or nano chimneys. The chimney *just* touches the o-ring... it makes a seal for now, but if the o-ring ever wears it will leak. I've used many different chimneys, and they all have this problem. The fill-holes are tiny. It's not a huge deal, but does make it a bit difficult to use. Would be great if they were a bit wider. I think this is ugly. It makes it look almost exactly like the Fogger v4... if you're into that look, you'll love this. I think it could be significantly shorter and still function properly. Overall, I think it's worth the price.
Reviewed on Was this review helpful to you? Yes / No

Avatar
YetiVapor
Member

VERIFIED OWNER
  • JoinedApr 2014
  • Posts 1430
  • Reviews 98
  • Kudos1055
Overall   (3.7)
› Quality
› Value
1 of 1 people found the following review helpful
PROS
Flavor is OKAY. Efficient vape.
CONS
Numerous.
Going to compare this to kayfuns... Flavor is good... On par with kfv4, but not as good as kfl... Not as good as the hype would lead you to believe. I notice that @ 1.1Ω I get the warmth and vapor production of a kfl+ @ 0.8Ω - likely due to the tiny chamber. This is a nice increase in efficiency, but the flavor doesn't match up unfortunately. AFC is way too loose, spins freely. Also build deck spins freely in the 'dry burn assembly' until tightly screwed onto a mod. The main problem with this is USING IT on a daily basis... The removable deck is a massive annoyance, the AFC ring is too loose, the top fill procedure sucks. You get your wicking right, and then blindly cram it in to the chimney without being able to see how the wick is being jostled around. Filling is pretty bad too.. Fill holes too small to be useful, and removing the entire top cap (even part with holes, see forum post) makes filling it easy, but you're dependent on the bottom o-ring holding on to the tank... and with the metal tank it's not a terribly tight fit. Build process is easy, but very limiting. Luckily, my standard build works well in this (2-2.5mm rod, 5 wraps) - Same build as I use on my kfl+ - only I don't get as good flavor. Again, in terms of flavor: KFL is better than the Gem, which is about equal to the Kf4. Just my opinion. I did get shorts on the first build attempt. The screw heads are not the same.. one head is longer than the other. Make sure they are on the proper side (they should be even when screwed in all the way) or it WILL short out. Short 510 pin is easy to fix, see forum.
Reviewed on Was this review helpful to you? Yes / No
Teflon + Brass Hybrid 510 Drip Tip
Teflon + Brass Hybrid 510 Drip Tip

Avatar
YetiVapor
Member

VERIFIED OWNER
  • JoinedApr 2014
  • Posts 1430
  • Reviews 98
  • Kudos1055
Overall   (3.5)
› Quality
› Value
1 of 1 people found the following review helpful
PROS
Comfortable, attractive, fits all attys.
CONS
NOT like SRX drip tip. I question the material.
Got this because I LOVE the SRX drip tip, and PTFE is the best drip tip material. This doesn't have as wide a bore or slanted edges as the SRX drip tip, so juice gets caught - which the SRX never did. So fail on that count. I also think this looks and feels more like POM than PTFE.
Reviewed on Was this review helpful to you? Yes / No
Portable Pill Cutter Splitter Storage Case
Portable Pill Cutter Splitter Storage Case

Avatar
YetiVapor
Member

VERIFIED OWNER
  • JoinedApr 2014
  • Posts 1430
  • Reviews 98
  • Kudos1055
Overall   (3.7)
› Quality
› Value
1 of 1 people found the following review helpful
PROS
Works.
CONS
Not the greatest.
Hard to keep pill positioned correctly. It works fine though. The 'V' that holds the pill in place should be the other way around so that the force of cutting pushes it INTO the V instead of out of it.
Reviewed on Was this review helpful to you? Yes / No

Avatar
YetiVapor
Member

VERIFIED OWNER
  • JoinedApr 2014
  • Posts 1430
  • Reviews 98
  • Kudos1055
Overall   (5.0)
› Quality
› Value
1 of 1 people found the following review helpful
PROS
Attractive, threads are good
CONS
Mine's upside down
This is the only logo I've seen that doesn't make me cringe. Looks nice in a bell cap. Threads are well machined. My logo is technically upside down (there's a bevel on one end that is supposed to go toward the base) but it doesn't affect performance at all.
Reviewed on Was this review helpful to you? Yes / No