shopping cart empty
bedosus's Product Reviews
Sort:

bedosus
Member

VERIFIED OWNER
  • JoinedSep 2013
  • Posts 88
  • Reviews 238
  • Kudos18
Overall   (5.0)
› Quality
› Value
5 of 5 people found the following review helpful
PROS
price very useful
CONS
none
I bought this to use these LED “5050 6500k-7000k Waterproof White Light Strip 5m, White Light/Waterproof / SKU: 1268500 “in my motorhome this has a remote control and you can turn on and off your LED, increase or decrease the intensity of the light. very useful very difficult to find this item . should be with. Related items of LED I hope someone follows this suggestion
Reviewed on Was this review helpful to you? Yes / No

bedosus
Member

VERIFIED OWNER
  • JoinedSep 2013
  • Posts 88
  • Reviews 238
  • Kudos18
Overall   (5.0)
› Quality
› Value
2 of 2 people found the following review helpful
PROS
Very useful
Very useful is a real power bank if you put the right batteries I put in this 4 Batteries 18650 Panasonic "3400mAh" I do not know if I'll use this to charge my batteries I load only with my Nitecore I4 Now I have a good supply for my smartphone and my e cig, The only problem to use my e cig, that it turns off if not have a power consumption, In this way i have always turn this and wait for the power bank starts operation I think I will add this little “LED lamp 0.2W USB USB Powered SKU: 1710500 “ so maybe I should not always turn on this. Below you can find a translation of the manual- Thank you to "iron_potato" who have found and translated this. my KUDOS [Translated from Taobao web as close as I can] Installation: 1. Unscrew two screws & uncover. 2. Put in one to four standard non-protected 18650 batteries with Negative onto spring end. 3. Activate the unit by either:- 3.1 Push button once, underneath the right hand side of the 7 segment display. 3.2 By charging the unit. Note: Need to re-activate on every battery change 4. Put on cover & fasten screws. 5. The display will show the charge percentage with last digit blinking. 6. Strongly recommended to charge it to max on every battery change to have more accuracy on power percentage. ("100" shown without last digit blinking) Adjustments & functions: 1. Press power button once, triple "ON" blinks and the unit is switched on. 2. Long press will either show "uP" or "dP" depending on last adjustment state. 3. Press & release power button will adjust the voltage output up or down in 0.5V per press & release. 4. Unit have last voltage setting memory after unit is switched off. 5. All ports can be use with 5.0-5.5V range, with 6.0V & above, both USB ports will be off. 6. Unit will auto off after 20secs with less than 120mA load or manually power off by long press till "OFF" shown. 7. Voltage adjustment will be locked with 4mm port on load & voltage set at 6.0V & above.
Reviewed on Was this review helpful to you? Yes / No

bedosus
Member

VERIFIED OWNER
  • JoinedSep 2013
  • Posts 88
  • Reviews 238
  • Kudos18
Overall   (1.2)
› Quality
› Value
1 of 1 people found the following review helpful
PROS
--
CONS
not work
this does not work. money and time wasted better to make the coils with your screwdriver
Reviewed on Was this review helpful to you? Yes / No

bedosus
Member

VERIFIED OWNER
  • JoinedSep 2013
  • Posts 88
  • Reviews 238
  • Kudos18
Overall   (5.0)
› Quality
› Value
1 of 1 people found the following review helpful
PROS
PRICE
Bought yet another one of these for a Christmas present for my friend is very useful to turn on the LED remotely with Remote Controller.
Reviewed on Was this review helpful to you? Yes / No

bedosus
Member

VERIFIED OWNER
  • JoinedSep 2013
  • Posts 88
  • Reviews 238
  • Kudos18
Overall   (4.7)
› Quality
› Value
1 of 1 people found the following review helpful
PROS
price
used I 4- 5 of these to widen the channels of my Kaifuns, only a few minutes of work, and the tip is over, but these can be worth the money paid
Reviewed on Was this review helpful to you? Yes / No