callmeal's Product Reviews
Sort:
Ambition Mods Bishop³ Customized 510 Pin
Ambition Mods Bishop³ Customized 510 Pin

callmeal
Verified

VERIFIED OWNER
  • JoinedOct 2016
  • Posts 34
  • Reviews 6
  • Kudos14
Overall   (2.0)
› Quality
› Value
I bought this shorter 510 pin with the understanding it allows you to fit the Bishop in the Pulse AIO. While it does indeed fit I am getting shorting and resistance jumping, almost like the pin is too short now. Have read similar reports online. Maybe if you raise the 510 contact on the Pulse it'll work but I gave up and just put the Bishop in a Bantam Box
Reviewed on
Ambition Mods Bishop³ Cubed RBA Bridge Tank (Black)
Ambition Mods Bishop³ Cubed RBA Bridge Tank (Black)

callmeal
Verified

VERIFIED OWNER
  • JoinedOct 2016
  • Posts 34
  • Reviews 6
  • Kudos14
Overall   (1.5)
› Quality
› Value
PROS
Flavour is decent Wicking is easy Screws can be removed to widen liquid intake for high VG No leaking...so far
CONS
Not compatible with a lot of devices even with the separately purchased pin! Difficult to get a tight MTL airflow without extra pin purchases Condensation builds up fast in most devices/configurations Separate purchases that really should have been included
Like others reviews have said this is a frustrating RBA. It's hard to understand how they could release something which is not compatible with so many boro mods, other manufacturers do it just fine. I can only assume they didn't test it thoroughly and only realised the problem after it went to production hence releasing the extra 510 pin. I actually ordered the extra 510 pin as well but this doesn't work properly, the tank fits in the Pulse AIO fine with it but has issues with shorting and resistance jumping. I did eventually get it working in a Cthulhu AIO(This has it's own issues unrelated to whatever RBA you're using). Coil positioning might take some trial and error, you have to make sure the airflow is hitting the side of the coil. 2 x 1.2mm airflow pins was too airy for me so I switched to 1 blank and 1 x 1.2mm airflow pin but the flavour takes a noticeable hit. I'd like to try 2 x 1mm airflow pins but that's an extra purchase of course. It comes with 2 identical tanks which is an unusual decision, I would've preferred if it came with 2 different colours or just one tank and more airflow pin options. It's hard to remove the deck unless you screw it onto a mod and pull the rest of the tank away, maybe this is a good thing though and will prevent leaking through the seals. Overall the flavour and performance(In the right boro device) is fine but not really worth the hassle and relatively expensive price. The pioneer insider at the same price point performs better and there are even cheaper bridges that outperform the Bishop3. I wouldn't be surprised to see a revised version of this tank soon.
Reviewed on
MK Mods Acrylic Back + Front Plates Panels for Vandy Vape Pulse AIO Kit (Clear)
MK Mods Acrylic Back + Front Plates Panels for Vandy Vape Pulse AIO Kit (Clear)

callmeal
Verified

VERIFIED OWNER
  • JoinedOct 2016
  • Posts 34
  • Reviews 6
  • Kudos14
Overall   (3.5)
› Quality
› Value
PROS
Feel and look better than the stock panels Nice build quality
CONS
No spare magnets More expensive than replacement stock panels
These panels feel better than the stock panels but fit is about the same, a little bit of movement but not too bad. For the price point it would be nice to get spare magnets. Overall happy with these panels
Reviewed on
SXK Four One Five 415BB MTL Styled RBA Bridge for Boro Tank AIO / Billet / SXK BB
SXK Four One Five 415BB MTL Styled RBA Bridge for Boro Tank AIO / Billet / SXK BB

callmeal
Verified

VERIFIED OWNER
  • JoinedOct 2016
  • Posts 34
  • Reviews 6
  • Kudos14
Overall   (4.0)
› Quality
› Value
PROS
Nice build quality Easy to coil and wick Smooth mtl vape with good flavour
CONS
No boro tank included Limited and slightly confusing airflow options
Airflow options are a bit limited but the preinstalled options suited me perfectly thankfully. The wicking holes look quite small but I haven't had any problems so far. It won't take 3mm coils because the 2.5mm coil I installed just barely fit, I never use 3mm coils anyway. Overall quite happy with the quality for the price.
Reviewed on
Ambition Mods Molen Bridge RBA for 2.0 AIO Mod / SXK BB / Billet Box
Ambition Mods Molen Bridge RBA for 2.0 AIO Mod / SXK BB / Billet Box

callmeal
Verified

VERIFIED OWNER
  • JoinedOct 2016
  • Posts 34
  • Reviews 6
  • Kudos14
Overall   (4.7)
› Quality
› Value
PROS
Excellent value Great flavour Good build quality Easy to wick
CONS
No adjustable airflow in the pin No boro tank included
I normally use a 1.2mm airflow in most tanks/bridges but the 1.2mm airflow that comes preinstalled in the Molen bridge only has small intake holes in the bottom of the airflow pin so it makes 1.2mm tighter than usual. My preference is wide open airflow in base and 1.2mm under the coil, I find this is perfect for MTL. Besides that though it's a great bridge for flavour and I will keep using it.
Reviewed on