[dismiss] FastTech will be on holiday from October 1, 2022 to October 7, 2022. All services resume on October 8, 2022, at 1:00 am (UTC). (details).
cory_m's Product Reviews
Sort:

cory_m
Verified

VERIFIED OWNER
  • JoinedOct 2016
  • Posts 93
  • Reviews 32
  • Kudos48
Overall   (2.7)
› Quality
› Value
PROS
Great flavour Bubble glass holds a lot
CONS
510 tightening issues Shorts Normal glass does not fit right
Got this thinking it was the same as one of the others getting great reviews, but without bubble glass... apparently not. On mine, it was impossible to fully screw in the deck with the regular glass resulting in flooding, while the bubble glass fits and works perfect. The 510 screw is reverse threaded. It screws into another screw under the deck that holds the positive post on... which is regular threaded. Tightening the 510 screw loosens the positive post screw unless it's super tight... I have no idea why they did this, either make them both reverse threaded or both regular threaded or it becomes a game of 'what can I wedge it with through the AFC holes so juice doesn't get into my mod's 510' - the answer is... not much the space is very small. With my initial build I had shorting, but after complete reassembly I noticed some gold coloured flecks on my desk, I assume some plating came off and landed in just the wrong place to short it out and it's now working fine. So, not entirely terrible... but likely not the best of the clones offered here either.
Reviewed on

cory_m
Verified

VERIFIED OWNER
  • JoinedOct 2016
  • Posts 93
  • Reviews 32
  • Kudos48
Overall   (4.7)
› Quality
› Value
PROS
Tasty Easy to build
CONS
Little too sharp on some edges post holes not drilled through
Very easy to throw in a large single coil or a couple of them, despite the post holes not being drilled all the way through. The removable top cap bit has punch outs for dual or single air flow in it, though with a single coil it seems to work better with a centered coil and air from both sides still. The top cap as a whole isn't notched making it easy t o rotate it to center the air flow on the coils no matter how you have the air restricted, though it does make it a little harder to remove the RDA from a mod. I had to take a file to some of the edges, like the edge above the drip tip o-ring, to save my fingers and the o-rings on some of the 810 tips I wanted to try in it.
Reviewed on

cory_m
Verified

VERIFIED OWNER
  • JoinedOct 2016
  • Posts 93
  • Reviews 32
  • Kudos48
Overall   (4.7)
› Quality
› Value
PROS
great flavor well made wasp nano top cap fits nice
CONS
pieces to hold coil bend easily o-rings a bit too tight, spares oddly sized dirty
After trying my entheon styled on my squonker, I wanted a second so I'd still have one to drip on and this one came up on here around the same time. I'm really liking the Hadeon topcap, it's even possible to rotate it without those rubber bits in to restrict the air to one hole on each side. Make sure to give it a good disassembly and scrub if you get one, mine had some Unknown Substance gummed up under the deck o-rings. Look into SKU 4624907 (14x1.5 white o-rings), nearly perfect on the deck - snug without being too tight - the spares that came with the RDA were mismatched sizes. Also don't overtighten the deck screws, those little tabs to hold the coil are quite soft/thin around the screw holes and they will bend.
Reviewed on

cory_m
Verified

VERIFIED OWNER
  • JoinedOct 2016
  • Posts 93
  • Reviews 32
  • Kudos48
Overall   (3.7)
› Quality
› Value
PROS
vape is nice made well lots of air options
CONS
poor quality seals juice control can cause flooding
A good little tank, comparable to a kayfun 5 but with many more airflow options. Easy to build on, nice small chamber for great flavor. All of the metal parts fit together nicely. Opening the juice control too far too quickly can and will flood the wick. Due to the dual chamber for flow control, changing flavours isn't as easy if some gets up between them. Be prepared you might have to replace o-rings, the ones that came with mine were deteriorating and either causing leaks or getting into the juice... which does not taste good. Strip it down and give it a good wash before using too. The insulator on the positive post isn't quite gap free, when juice gets past the wick on the deck it tends to flow down into the air intake there.
Reviewed on
1*LED 3-Mode 975LM LED Flashlight w/Head Focus Zoom
1*LED 3-Mode 975LM LED Flashlight w/Head Focus Zoom

cory_m
Verified

VERIFIED OWNER
  • JoinedOct 2016
  • Posts 93
  • Reviews 32
  • Kudos48
Overall   (5.0)
› Quality
› Value
PROS
Super bright Very sturdy Focus-able Doesn't mind aging 18650s Can blind you temporarily
CONS
Gets a bit hot after a few minutes Modes can be a bit of a pain Lens is easy to scratch Can blind you temporarily
This is the light I wished I had that time I was camping and needed to cross a stream in the middle of the night. It is super bright, has a focus feature and outshines many flashlights I've seen at 10x or more the price. It's quite happy to be powered by my aged but (now) still useful 18650s. I've found the bit by the light actually gets pretty warm after a few minutes, I'd expect it gets very hot after a while. I've had a few times now where I just wanted it to turn off/on and it's gone into some strobe thing I don't have any real use for, supposedly I can replace the controller with one that can be set up to do just on/off. The lens over the LED is a bit soft, I noticed after cleaning it with a microfiber it had acquired some scratches. Overall it's tons better than any of the 3xAAA lights I've used, I've never had to smack this one to make the batteries get better contact for instance and it's output is basically night and day when used side by side. Be warned... this thing can blind you in the middle of the day.
Reviewed on