shopping cart empty
djvillan's Product Reviews
Sort:
HYDRO Droplet Styled RDA Rebuildable Dripping Atomizer
HYDRO Droplet Styled RDA Rebuildable Dripping Atomizer

Avatar
djvillan
Member

VERIFIED OWNER
Overall   (5.0)
› Quality
› Value
10 of 12 people found the following review helpful
PROS
Flavour Quality machining and finish
CONS
Proprietary drip tip
What an absolute gem of a rda. This little talked about or reviewed single coil 22mm rda produces flavour which very few other flavour rdas can match. This stainless steel version has an adjustable inner air flow cap and a removable proprietary drip tip. The draw from the single air flow hole is an open dl type but it can be dialed down to suit your style and almost mtl vaping if you use the one piece PC cap/drip tip from the non stainless steel versions. The base has knurling which aids in removing the rda from your mod. The one piece insulator/air flow post looks unusual and I have not been able to confirm what it's made of but it works flawlessly and it has not melted or degraded when running it up to 75W. One post is intentionally positioned taller than the other post with openings for the coil also higher in order to make it easier to install your coil where the coil legs are not pre bent or parallel although the slits for your coil are a bit small, so trying to fit thick exotic wire coils is impossible without filing the slits to make them taller. A 4mm deep juice well is sufficient for the size of the rda and in squonk mode it's perfect. This rda really shines above most other rdas in the flavour department, for all types of e-liquid flavours and VG/PG ratios. For me it beats the Citadel, the Haku Venna, the Flave and other highly regarded flavour rdas. Pick one up and experience the flavour it produces for yourself.
Reviewed on Was this review helpful to you? Yes / No
Authentic Vapor Storm Raptor Mechanical Squonk Box Mod
Authentic Vapor Storm Raptor Mechanical Squonk Box Mod

Avatar
djvillan
Member

VERIFIED OWNER
Overall   (5.0)
› Quality
› Value
18 of 29 people found the following review helpful
PROS
Price Build quality ABS construction Supports 18650, 20700 an 21700 batteries Vape while charging function Semi regulated Spring loaded 510 Silicone bottle Frosted door panel Plug in USB charging port and cable Voltage, resistance, temperature range 18650 battery adapter
I'm really impressed with this semi mechanical/regulated squonk mod made out of ABS material. The overall build quality and finish is very good. It features chip protection, overheating protection and can support builds as low as 0.05ohm. Voltage range is 3.2V-4.2V with a maximum power output of 120W and 60A. It has led indicators when in use and while charging plus a vape while charging feature. You can use 18650, 20700 and 21700 batteries and an 18650 battery adapter is included. The silicone bottle is very good quality. The 510 pin is spring loaded, the fire button throw is short and instant and there is no sign of arcing. The frosted front and back door panels look great, they use 4 small but strong magnets in each corner and fit perfectly with no sign of panel movement. The contact plates appear to be plated copper, provide good conductivity and do not tear your battery wraps. Attys up to 24mm fit with no overhang and is comfortable in the hand. I cannot find any cons with this squonk mod and at this price it is a bargain. Hopefully they will offer the different coloured frosted door panels and other colours as a separate purchase.
Reviewed on Was this review helpful to you? Yes / No
Dvarw DL Styled RTA Rebuildable Tank Atomizer
Dvarw DL Styled RTA Rebuildable Tank Atomizer

Avatar
djvillan
Member

VERIFIED OWNER
Overall   (4.7)
› Quality
› Value
6 of 7 people found the following review helpful
The 24mm Dvarw DL FL rta is made from 316 stainless steel with a glass tank which has 6ml e-liquid capacity. Everything is basically the same as the 22mm Dvarw MTL FL rta, only bigger and with a shorter and wider bore 510 drip tip. Unfortunately it only comes with two airflow inserts and the other four airflow inserts must be bought separately.
Reviewed on Was this review helpful to you? Yes / No
Replacement Glass Tank for Eleaf MELO 3 Nano Tank Clearomizer (5-Pack)
Replacement Glass Tank for Eleaf MELO 3 Nano Tank Clearomizer (5-Pack)

Avatar
djvillan
Member

VERIFIED OWNER
Overall   (5.0)
› Quality
› Value
6 of 7 people found the following review helpful
PROS
Price Quality Suits some popular small capacity attys
These replacement bubble tanks are perfect for increasing the capacity and look of some of the most popular older 22mm atty's such as the Subtank Mini clone (2ml version), Goblin Mini, Dotmod Petri RTA, Smok TFV4 Mini (rba version) as well as today's popular 22mm attys such as the Smok TFV8 Baby Beast (non rba and non EU version) and of course the Eleaf Melo 3 Nano. I managed to fit 3.7ml of e-liquid in these glass tanks. The price is excellent for five glass tanks. I have ordered more.
Reviewed on Was this review helpful to you? Yes / No
Destiny Styled RTA Rebuildable Tank Atomizer
Destiny Styled RTA Rebuildable Tank Atomizer

Avatar
djvillan
Member

VERIFIED OWNER
Overall   (4.2)
› Quality
› Value
3 of 3 people found the following review helpful
This clone of the Hellvape Destiny rta is very good. Overall machining and finish is good. Easy to build on gta style deck with a reduced chamber and short chimney help to produce a vape with very good flavour. It comes with a 2ml glass tank pre-installed and a 4ml bubble glass tank in the package. Like the authentic the supplied 810 drip tip is not to my liking. A 510 drip tip adapter is not included.
Reviewed on Was this review helpful to you? Yes / No