eciguser's Product Reviews
Sort:

eciguser
Verified

VERIFIED OWNER
  • JoinedAug 2013
  • Posts 0
  • Reviews 492
  • Kudos0
Overall   (5.0)
› Quality
› Value
very solid device, same height and length as VS but it is slightly wider, TC chip has identical features to VS clone that was sold here, the only difference being is that it asks if it's a new coil each time you change the atty, NP is available, have had no issues with TC using twisted 30g ni200 and 28g kanthal as in the photos, a very small portion of the display is lost on the right hand side, but that is very minor issue the sleeve fits perfectly and is very tight, maybe too tight because one side of the sleeve doesn't sit exactly flush with the body, but that is also very minor and easily fixed, the cover itself has a grainy texture, almost like a very fine sandpaper and repels stains and fingerprints quite well all in all, very impressed with this mod, especially for the price, highly recommended
Reviewed on

eciguser
Verified

VERIFIED OWNER
  • JoinedAug 2013
  • Posts 0
  • Reviews 492
  • Kudos0
Overall   (5.0)
› Quality
› Value
i've heard titanium is springy, but this stuff was very easy to manage and bends into shape easier than kanthal, and works perfectly for TC made 4 wraps around 3mm rod for a perfect 0.15 ohms, threw it in a stumpy, fired it up with both the VS and zero mods clones and both performed perfectly WITHOUT changing any settings that i was using for nickel builds (didn't change the temp, left it at 220C and NP setting was the same as out of the box) so, overall, for TC, this is a lot easier to work with than nickel or kanthal\nickel twist
Reviewed on

eciguser
Verified

VERIFIED OWNER
  • JoinedAug 2013
  • Posts 0
  • Reviews 492
  • Kudos0
Overall   (5.0)
› Quality
› Value
rock solid, very few box mods are full stainless steel, battery cover sits perfectly flush, temp control works perfectly with both ni and ti, prompts for new atty up/down but only if left idle for a few hours, only con is the height, touch taller than full size, would've been perfect if it was shorter, also noticed the spring loaded pin for the atty (not the battery) is slightly off center but doesn't affect performance, claims to support TCR in the manual, but not sure if thats any different to the original nickel purity setting, haven't tested it
Reviewed on
100mm Mini Brass Sliding Gauge Vernier Caliper Measure Tool
100mm Mini Brass Sliding Gauge Vernier Caliper Measure Tool

eciguser
Verified

VERIFIED OWNER
  • JoinedAug 2013
  • Posts 0
  • Reviews 492
  • Kudos0
Overall   (4.5)
› Quality
› Value
good to do a quick check, little bit loose but it is good enough
Reviewed on
Stainless Steel 810 to 510 Drip Tip Adapter (4-Pack)
Stainless Steel 810 to 510 Drip Tip Adapter (4-Pack)

eciguser
Verified

VERIFIED OWNER
  • JoinedAug 2013
  • Posts 0
  • Reviews 492
  • Kudos0
Overall   (4.7)
› Quality
› Value
good quality compact adapter for conversion
Reviewed on