[dismiss] FastTech will be on holiday from October 1, 2022 to October 7, 2022. All services resume on October 8, 2022, at 1:00 am (UTC). (details).
hazozita's Product Reviews
Sort:

hazozita
Verified

VERIFIED OWNER
  • JoinedMay 2013
  • Posts 67
  • Reviews 547
  • Kudos55
Overall   (3.7)
› Quality
› Value
PROS
DNA250C Centered 510 holds 30mm attys with room to spare
CONS
Thin plastic construction Hard to remove door Small fire button Bottle access clumsy Included RDA is very poor
The main thing going for this is the DNA250C. It’s a joy to use. The mod itself, however, has a few issues. The case feels like cheap plastic. It’s very comfortable to hold but there’s no escaping the feel of cheap plastic. It’s incredibly lightweight. The door is held on by two tabs on each side that click into slots on the body of the mod. It snaps in firmly. VERY firmly. It is a struggle to take the door off. I’m finding that it’s best to not click the door in all the way. It leaves a small gap but makes the door much easier to remove. The theme it comes with is horrible. I replaced it quickly. The stock bottle (only 1 is provided) is a bit too soft for my taste. It’s not a bad bottle at all, with nice knurling on the cap for easy removal. Fortunately, a lot of bottles will fit. The only issue is that the squonk nipple is offset to allow for a centered 510. This requires the feed tube to bend a bit. That can put a strain on the cap for taller bottles. I’m presently alternating between using a SJMY bottle and an Hcigar bottle, both of which are working fine. The 510 is spring loaded and feels pretty well made. Zero button rattle. The fire button is a small but pretty easy to find by feel. Since the 510 is centered it will easily hold a 30mm atty with room to spare. A 22mm atty looks sort of lost in all that space. The batteries are not too tough to fit into the sled. Removal is a bit more tricky. I have to remove the bottle first so that I can get a good grip on the batteries when I need to swap them. The top battery contact is spring-loaded; the bottom is fixed. It comes with an atty. Don’t even bother with it – shoddy design and performance.
Reviewed on
Iwodevape Stainless Steel 510 to 810 Drip Tip Adapter (4 Pieces)
Iwodevape Stainless Steel 510 to 810 Drip Tip Adapter (4 Pieces)

hazozita
Verified

VERIFIED OWNER
  • JoinedMay 2013
  • Posts 67
  • Reviews 547
  • Kudos55
Overall   (3.7)
› Quality
› Value
PROS
Decent quality machining and o-rings Knurling looks nice Good fit on both the 510 and 810 ends
CONS
Narrower than most 810 tips Black is more gunmetal than black
These function just fine, but are sized a bit small with regard to diameter. They are 16.2mm in diameter, which is narrower than many 810 tips. Thus, the 810 tip will overhang a bit (see photo attached). The knurling looks and feels nice. The black one, however, is more of a gunmetal plus you can see some silver through the black on the knurled areas. A better fitting adapter is SKU 9136608. It's more expensive, but it's 18.1mm in diameter, which makes for a better fit with many 810 tips. It's included in the photo for comparison.
Reviewed on
Vandy Vape 316L Stainless Steel Mesh Wire
Vandy Vape 316L Stainless Steel Mesh Wire

hazozita
Verified

VERIFIED OWNER
  • JoinedMay 2013
  • Posts 67
  • Reviews 547
  • Kudos55
Overall   (5.0)
› Quality
› Value
I've tried almost all of the VV mesh options and I like this 200 mesh SS the best. It works well in both wattage and TC modes, and produces excellent flavor. In addition to using it with the VV RDA and RTA it also works fine with other mesh RDAs and tanks, but usually needs a slight trimming in width to fit the clamps. A roll lasts a long time since mesh builds are so easy to clean by a quick dry burn.
Reviewed on
Replacement Bottom Feeder Bottle for BF Squonk Mod
Replacement Bottom Feeder Bottle for BF Squonk Mod

hazozita
Verified

VERIFIED OWNER
  • JoinedMay 2013
  • Posts 67
  • Reviews 547
  • Kudos55
Overall   (5.0)
› Quality
› Value
PROS
Nicely made Good threading Soft but not too soft
CONS
Hard to see liquid level
This is a nice quality bottle. The cap threading is well done and seals perfectly. The bottle is 47.9mm from the base to the top of the cap (with the cap on and threaded down). The feed tube is 4.5mm OD and 2mm ID. The cap is 16mm in diameter. Good value for the price.
Reviewed on

hazozita
Verified

VERIFIED OWNER
  • JoinedMay 2013
  • Posts 67
  • Reviews 547
  • Kudos55
Overall   (4.7)
› Quality
› Value
PROS
Excellent performance in squonk mode Ample, smooth airflow Easy build Good build quality throughout
CONS
Low profile drip tips
Although this is billed as an “authentic” it really is a close copy of the Dead Rabbit. It has a very similar deck and overall design. Regardless of what it is called or if is a clone, the performance has been excellent. Ample clouds while retaining solid flavor. It’s a postless deck so if you’re comfortable building on such a deck, this will pose zero problems. Very nice machining throughout. Good quality post screws and very nice o-ring tension. Amazing that it costs only about 8 bucks. Airflow is ample, smooth and easy to adjust. It comes with a squonk pin installed, and it’s is one of the most over-squonk proof attys out there. Virtually impossible to over-squonk this. Only some very small cons. The barrel top is a little sharp, and the included drip tips are rather short for my preference. Neither is at all significant or detracts from performance. Although the product pic shows it with a red resin drip tip, mine came with a purple-ish resin tip (in addition to the black ones). Looks great against the black body. Going to pick up a second one in SS.
Reviewed on