hazozita's Product Reviews
Sort:

hazozita
Verified

VERIFIED OWNER
  • JoinedMay 2013
  • Posts 74
  • Reviews 558
  • Kudos72
Overall   (3.5)
› Quality
› Value
I love the overall look of this atty. Compact, but roomy enough for decent size coils. Also love the build deck – the two posts work well with everything from single round wire builds to chunky coil duals. The post design is basically the same as the UD Skywalker but with much better machining and tolerances. Nice squonk action, and the squonk pin comes pre-installed. There is a small grub screw that comes in the spares pack should you want to block off the squonk tube and use it as a regular dripper. Cons are the driptip (proprietary, ugly, and gets way too hot), o-rings (too tight) and the airflow adjustments. It looks as if there is an AFC ring on the top cap but on mine it’s totally unmovable (struggled with it a lot before giving up). That’s OK since the airflow wide open is a semi-restricted lung hit, which works fine for me. You can adjust it somewhat by rotating the cap so the inlets are not inline with the deck cutouts, but it's quirky at best. I run it fully open in dual coil mode all the time. I fixed the drip tip issue by replacing it with one from the Blitz Noxus RDA. It fits perfectly, looks better, and does not get nearly as hot as the stock one. Decent but not outstanding flavor. It’s not bad at all, but other attys (Narda, Flave, Mulciber, Armor) are a bit better.
Reviewed on

hazozita
Verified

VERIFIED OWNER
  • JoinedMay 2013
  • Posts 74
  • Reviews 558
  • Kudos72
Overall   (1.5)
› Quality
› Value
The handle may be stainless steel but the bristles certainly are NOT -- they are made of some sort of synthetic material. They will burn and melt if placed in contact with anything hot, so these are NOT something to use to clean a hot coil! The handle is so short that it's not all that handy to use.
Reviewed on

hazozita
Verified

VERIFIED OWNER
  • JoinedMay 2013
  • Posts 74
  • Reviews 558
  • Kudos72
Overall   (5.0)
› Quality
› Value
I was very impressed at how well these coils were made -- perfectly formed and coiled. Performance in an RDTA has been outstanding. Great value for the price. Resistance is about 0.25 ohms on the 28/32 version.
Reviewed on

hazozita
Verified

VERIFIED OWNER
  • JoinedMay 2013
  • Posts 74
  • Reviews 558
  • Kudos72
Overall   (1.5)
› Quality
› Value
PROS
Thin but decent quality plastic
CONS
Holes not drilled through Missing hardware
This looked like it would be perfect for my needs with all sorts of large holes that could hold 30mm mods and an ample area for storing box mods. Unfortunately, mine was defective. It was missing all the hardware to put it together, plus one bank of holes was not drilled through. On the plus side, the plastic was thin but felt more than sturdy enough to serve as a mod and juice stand. Nice color combo as well. Great service from Fasttech -- they covered the cost of shipping it back and gave me a full refund without any problem or delay. Could be a decent and affordable stand if you get one that is not defective.
Reviewed on

hazozita
Verified

VERIFIED OWNER
  • JoinedMay 2013
  • Posts 74
  • Reviews 558
  • Kudos72
Overall   (4.5)
› Quality
› Value
PROS
Uses BB bridges Good performing board that's easy to navigate Excellent bridge included Easy battery swap Customization options
CONS
Not a fan of the drip tip
This is an excellent way to get into the BB world or, if you already have a BB, an inexpensive option for when you don't want to carry the BB. The build quality is fine. It's all plastic, but the plastic is done well, with neat seams, a smooth finish, and tight fitting panels. No creaks or rattles, and the fire button has a nice feel to it. The star of the show is the included bridge. Super simple to build and wick, and excellent performance. The coil option is not bad -- fine for use in a pinch when you don't want to build, but it's nothing special. It has lots of little touches that make it a pleasure to use. The contact can be adjusted, which is great for when you have a bridge that's just a wee bit too short (or long). Both panels remove so getting the battery out is easy with zero risk of tearing a wrap. I didn't get any of the customization options but they are there should you want to customize the look. The board works well, and doesn't disappoint in terms of performance or ease of use. It has TC but, as with all other VV boards, be prepared to adjust the TCR rather than rely on the presets. It's no DNA (either in wattage or TC) but it gets the job done. The only area where I was disappointed was the drip tip. Didn't care for the look or the feel. But since any 510 tip can be used, zero problem. Already have a second one on order. One of the best BB options in terms of value and performance I've come across so far.
Reviewed on