shopping cart empty
jumpjet's Product Reviews
Sort:
ZERO Modz Styled VW Variable Wattage APV Box Mod
ZERO Modz Styled VW Variable Wattage APV Box Mod

Avatar
jumpjet
Member

VERIFIED OWNER
  • JoinedMar 2014
  • Posts 812
  • Reviews 20
  • Kudos627
Overall   (5.0)
› Quality
› Value
6 of 6 people found the following review helpful
PROS
Build Quality Temperature Limiting (TC) Wattage Range
CONS
Weight (if you prefer light mods)
This mod looks and feels like a quality mod. With a full sized RTA on it, it is not light-weight, it's substantially solid. This may surprise you, as you might think that with that wooden/resin interior, it might be a reasonably light mod, it isn't. The build quality is high, and the grey one I received has a very smooth finely textured sleeve coating, this helps provide additional grip. The chip wakes up immediately on firing, there is no delay. If it has entered deep sleep (1 hour of non-use), then you will be asked if you are using a new coil before you can fire it. You click the UP button for YES and the DOWN button for NO. This doesn't bother me at all, though I can imagine it annoying some users. I tried the mod with a number of 2.5mm Kanthal A1 builds on a Taifun GT 2S. My normal vaping wattage as a mouth to lunger being around 15w. I had no problems with resistance readings or any other form of chip/electronic flakiness. Once a couple of reels of NI200 wire had arrived, I have tried just a couple of Nickel Temperature controlled builds. Everything appears to be working correctly, temperature limiting is cutting in at the correct (indicated) temperatures, and it passes the 'cotton burn' test. My first build being a single 3.0mm coil using 28 AWG @ 0.2 ohm in a Magma RDA. It worked perfectly at all wattages. Though most of the tests were well under 40w because all my juice is DIY @ 14mg/ml and above. All these tests and the few tests at higher wattages brought on a headache (naturally) pretty quickly. The next build was on a Taifun GT 2s. It's a 3.0mm 28AWG NI200 coil @0.15 ohms. I find this a great build and it's giving a really good vape with lots of flavour @22.5w. I have settled for the 20w to 25w area because of the NIC levels in my juice, a good vape with no headaches. Temperature-wise I have the unit set for 350F (just under 180C). This is well below what might be deemed as a cotton burning temperature. In reality the temperature reading peaks at around 320F when firing the unit without vaping at this setting. I can't vape and read the screen at the same time, but obviously the peak temperature should be lower when vaping. So I have headroom in the setting, and temperature limiting never kicks in under normal use. So really if temperature limiting kicks in, then either my wicking has gone tits-up, or my tank is empty, which should be good for those that don't use glass or plastic windowed tanks. Personally I think this is a good mod. I would love to see some snazzy sleeves released for it, so I could change the look now and then.
Reviewed on Was this review helpful to you? Yes / No

Avatar
jumpjet
Member

VERIFIED OWNER
  • JoinedMar 2014
  • Posts 812
  • Reviews 20
  • Kudos627
Overall   (5.0)
› Quality
› Value
1 of 1 people found the following review helpful
PROS
Quality build components Ease of build Ease of filling Comfortable drip tip
CONS
None
The build quality for this atomiser is excellent. It is very easy to access, build, and fit a coil to this unit. The deck is not fiddly or awkward to use at all. Personally I went for a 1.5 - 1.6 ohm 28 AWG microcoil, with organic cotton wick.. This puts me in my preferred 8 to 12 watts vaping range when used on a mechanical mod. The resistance is also high enough to allow mods such as the Innokin SVD, Vamo or kick module (if you prefer) to fire successfully. Though I have only had the thing a day, the 1st build went very well and the I get lots of vapour and flavour. There has been no leaking, and no dry hits, so the amount of cotton used must be correct. Whereas my Kraken and Fogger v4 builds are still a 'work in progress' :-( The added bonus is that the I like the included drip tip, it's very comfortable on the lips. This atomiser goes up there alongside my Kayfun as a great vape. Recommended. A
Reviewed on Was this review helpful to you? Yes / No
INR 18650-25R 3.6V 2500mAh Rechargeable Li-ion Batteries (4-Pack)
INR 18650-25R 3.6V 2500mAh Rechargeable Li-ion Batteries (4-Pack)

Avatar
jumpjet
Member

VERIFIED OWNER
  • JoinedMar 2014
  • Posts 812
  • Reviews 20
  • Kudos627
Overall   (5.0)
› Quality
› Value
PROS
High Drain Good Quality Reliable
CONS
None
These are one of the few really good batteries available here. Ideal for sub-ohm vaping, or other high drain applications. Good value compared to local prices. I've bought these before and will buy them again.
Reviewed on Was this review helpful to you? Yes / No
Authentic Joyetech eVic VTC Mini 60W TC VW Variable Wattage APV Box Mod
Authentic Joyetech eVic VTC Mini 60W TC VW Variable Wattage APV Box Mod

Avatar
jumpjet
Member

VERIFIED OWNER
  • JoinedMar 2014
  • Posts 812
  • Reviews 20
  • Kudos627
Overall   (5.0)
› Quality
› Value
PROS
Nice screen Plenty of power Supports Kanthal,SS,Ti,Ni Good value
CONS
None
I just like this mod, it works well, and gets the job done. It's pretty small and light, and support Temperature Control across an variety of wires. It has a good range of colours as well. It's flash upgradeable via USB, and if you don't like the new firmware v 2.0 screen, you can flash it back to firmware 1.3. Firmware 1.3 will still add that SS TC mode and bump the output to 75 watts, but retains the old screen layout that I prefer. Recommended
Reviewed on Was this review helpful to you? Yes / No
Jade + Stainless Steel 510 Drip Tip (7-Pack)
Jade + Stainless Steel 510 Drip Tip (7-Pack)

Avatar
jumpjet
Member

VERIFIED OWNER
  • JoinedMar 2014
  • Posts 812
  • Reviews 20
  • Kudos627
Overall   (5.0)
› Quality
› Value
PROS
They look nice They fit
CONS
None
What more can be said, they're drip tips , they're good quality, and they look good on your atomisers
Reviewed on Was this review helpful to you? Yes / No