shopping cart empty
[dismiss] FastTech will be on holiday from October 1st, 2020 to October 8th, 2020 to celebrate the National Day Holiday and Mid-Autumn Festival. Services will resume on October 9th, 2020 (details).
neovdr's Product Reviews
Sort:

Avatar
neovdr
Member

VERIFIED OWNER
  • JoinedJul 2014
  • Posts 469
  • Reviews 14
  • Kudos315
Overall   (4.7)
› Quality
› Value
2 of 2 people found the following review helpful
PROS
Full complement of accessories Posts are 1:1 and without burs Airflow options ranging from airy to restricted. Includes slots for single coil building. Threading, tolerances are really good.
CONS
Post holes are big. 28AWG out of the question. White super wide bore cap needed sanding.
Extemely good value for money with this SKU. You get the full accessories that you would need and even though the white wide topcap was not fitting in mine I can't complain. The posts are as they should be with no flaws. The post holes are rather big as the original has them which can make trapping 26awg wire tricky but not impossible by any stretch. I found that using the grub screws for the negative posts and the sturdy phillips screw for the positive post works best for me. The deck can be a bit shallow but if you lay down a bit more cotton in it you will not get leaks. The machining on this RDA is impressive with overall smooth threads, both on the 510 and the top cap. This one also has the proper air slot arrangement that caters for the single coilers out there.
Reviewed on Was this review helpful to you? Yes / No
Authentic Eleaf iStick MELO III Sub Ohm Tank Clearomizer
Authentic Eleaf iStick MELO III Sub Ohm Tank Clearomizer

Avatar
neovdr
Member

VERIFIED OWNER
  • JoinedJul 2014
  • Posts 469
  • Reviews 14
  • Kudos315
Overall   (4.7)
› Quality
› Value
1 of 1 people found the following review helpful
Using it with 0.5 ohm coils and it is showing great vapour production. The flavor is also good especially if you don't vape with the airflow wide open. I don't find it suitable for mouth-to-lung hits so this one is a lung hitter only. Finally, I don't think this one can tolerate liquids with a VG ratio bigger than 70% maximum.
Reviewed on Was this review helpful to you? Yes / No
Slojo Style Mechanical Mod
Slojo Style Mechanical Mod

Avatar
neovdr
Member

VERIFIED OWNER
  • JoinedJul 2014
  • Posts 469
  • Reviews 14
  • Kudos315
Overall   (4.2)
› Quality
› Value
1 of 1 people found the following review helpful
PROS
Machining quality Good copper Engravings
CONS
Stiff floating 510
This mod is my hardest hitting mixed copper + brass mod. It easily beats the Akuma in that regard. The machining and engraving are spot on with the exception of the locking ring engravings which are lighter than the original. As this was in my opinion the tackiest thing on the original I didn't mind at all. The only issue with this mod is the stiff floating 510 which needs to be broken in first. The fix is easy: get your longest threaded atty (magma for example) and screw it in forcefully a couple of times. Overall I am pleased with this and has become my daily copper mod.
Reviewed on Was this review helpful to you? Yes / No
Authentic IJOY EXO RTA Rebuildable Tank Atomizer
Authentic IJOY EXO RTA Rebuildable Tank Atomizer

Avatar
neovdr
Member

VERIFIED OWNER
  • JoinedJul 2014
  • Posts 469
  • Reviews 14
  • Kudos315
Overall   (4.5)
› Quality
› Value
PROS
Single coil deck Dual coil deck Extra glasses Flavor Premade coils
CONS
Threading a bit short and rough May seep from the bottom
This atomizer comes fully packed with accessories. You get 2 decks for single and dual coil, two extra glass pieces for the small size and a big glass with chimney extension for 6ml quantity. Usually you would pay for them as extra accessories yet here they are included. The dual coil deck is a classic velocity style deck but the deck that I prefer though is the single coil one. You get bottom and side airflow on that deck and the flavor is really nice. Tested with the premade kanthal coils that come in the box which are quite good! The threading on this atomizer while functional seems a bit rough and the edges are a little sharp. Nothing that detracts from functionality though. You need however to be careful wicking this atty. If your cotton is too little juice will flow down the center airhole and start pooling on the base. Then it is possible that the liquid seeps out from the 510. So if you hear gurgling flip the tank upside down and blow on it to clear the liquid. For the price and the amount of accessories, I am very pleased with this tank.
Reviewed on Was this review helpful to you? Yes / No
Authentic Eleaf iStick Power 80W 5000mAh TC VW APV Mod (Brushed Silver)
Authentic Eleaf iStick Power 80W 5000mAh TC VW APV Mod (Brushed Silver)

Avatar
neovdr
Member

VERIFIED OWNER
  • JoinedJul 2014
  • Posts 469
  • Reviews 14
  • Kudos315
Overall   (4.7)
› Quality
› Value
PROS
Built-in LiPo 5000mAh Small size Low weight Solid 510 Arctic Fox compatible
CONS
Bottom plate scratches easily Pressing + - together miss triggers
I got this one over the QC200W and I have to say I am happy with my purchase. The mod has a huge 5000 mAh LiPo that holds me 1 day on my Melo 3 at 40W or 3 days on my Nautilus Mini at 12W! And all this in a very compact size as it is the norm with iSticks. The fact that it has a LiPo also makes this mod very light if you compare it to the weight that two 18650s have. The 510 which used to be the bane of iSticks seems to be much more robust. Using it with some stiff drippers and I have not had any connection problems yet. The biggest pro this mod has is that it is compatible with the Arctic Fox custom firmware. Ditching the stock eLeaf version and going to the custom Arctic Fox adds tons of value to the mod. With NFEToolbox you have the functionality that DNA mods get through eScribe. You can edit your curves, what the button shortcuts are, how much the cuttof is etc. Absolutely exhaustive options there. This mod can potentially come with + and - buttons that when pressed simultaneously trigger the middle one instead of registering as a double button press. This was the reason Grimm Greene and a few other people had trouble unlocking their mods. The solution to this is to press the buttons at the edges (so fingers as far left for the + and as far right for the -). By pressing like this lock/unlock works 100% of the time. Another con is that the bottom plate scratches and loses the color from repeatedly setting it on surfaces. Not that much of an issue and nothing that a 2 dollar silicon case from here cannot solve.
Reviewed on Was this review helpful to you? Yes / No