pazuzu's Product Reviews
Sort:

pazuzu
Verified

VERIFIED OWNER
  • JoinedAug 2013
  • Posts 624
  • Reviews 55
  • Kudos410
Overall   (4.2)
› Quality
› Value
PROS
THREE TUBES Slim, sleek, and straight! Adjustable center pin
CONS
Worst spring I have ever seen.
Great mod, matches perfectly with my fogger. The threads on all my tubes were perfect, all the battery vent holes are normal and uniform in size. The locking ring is a little loose, and the button is a little sloppy even with a better spring. The center pin moves up and down so all your atomizers can sit flush, and the included brass nut on the center pin can be unscrewed to eliminate battery rattle on unprotected flat tops. I did have some issues with making everything sit flush with no gaps using protected Trustfires, but they're shitty anyway. I found that the top and bottom caps from my Private V2 fit on the tubes, so I wouldn't be surprised if others fit as well. The spring, oh god, the spring. I don't even know how that piece of twisted wire could be called a spring, I could make a stiffer spring out of 26ga kanthal. I don't know how, or why they included such a useless peice of metal, you'd be better off with no spring as the stock one got stuck energizing the battery once every 3 presses. I might buy the single 650 JM mod with the silver contacts just to see if it has the same horrible spring. It's a great set if you can find a real spring.
Reviewed on

pazuzu
Verified

VERIFIED OWNER
  • JoinedAug 2013
  • Posts 624
  • Reviews 55
  • Kudos410
Overall   (5.0)
› Quality
› Value
PROS
Dual coil airholes Quality construction Post holes Nice deck lip
CONS
None
This dripper makes the IGO L and IGO W look like garbage. No modifications necessary to start running dual coils. Looks much better than it does in FT's pictures (I almost didn't buy it because it looked so ugly). Within 20 minutes of opening my package, I had it set up at 1 ohm with dual micro coils, airflow is perfect in my opinion. Absolutely no complaints. If you're looking to try out dripping, buy this. Hell, buy this even if you have dozens of drippers, it's FIVE DOLLARS.
Reviewed on

pazuzu
Verified

VERIFIED OWNER
  • JoinedAug 2013
  • Posts 624
  • Reviews 55
  • Kudos410
Overall   (4.2)
› Quality
› Value
PROS
Price Takes 350/650 Removable top cap for EGO threaded atomizers
CONS
Gaps between tubes Very tall in 650 mode
It's not the prettiest battery tube on the market, but for the functionality alone it's more than worth the price. It uses 33hz pulse width modulation, so running it under 6 volts, you can hear the atomizer cycling, sounds kind of like when you talk into a fan, but it doesn't really bother me. Nice thick stainless steel all around, feels very substantial. The threading is excellent, 510 connection is smooth as butter, and the main body is very smooth with just a little bit of grit, which I believe will wear away. Pleasant click to the buttons, although the main button spins which could be an annoyance, but I spin it for fun sometimes. The screen is placed in my vamo a little off center so the bottom juts out a millimeter or two, but the text is bright, visible, and readable at pretty good viewing angles. My main complaint in this department is the font (silly, I know), which to me is the basic chinese english font on every cheap device I've ever used all the way back to the 64mb mp3 player I bought in 2004. All annoyances aside, it works, and if you're going to buy a vamo, buy this one.
Reviewed on

pazuzu
Verified

VERIFIED OWNER
  • JoinedAug 2013
  • Posts 624
  • Reviews 55
  • Kudos410
Overall   (5.0)
› Quality
› Value
Amazing juice at a great price. Tastes just like fresh, juicy, tart, sweet, and fruity strawberries. Great silicone tip small enough to fit into tanks, and fill holes of my genesis atomizers. I will definitely be buying more Liqua juices.
Reviewed on

pazuzu
Verified

VERIFIED OWNER
  • JoinedAug 2013
  • Posts 624
  • Reviews 55
  • Kudos410
Overall   (4.2)
› Quality
› Value
PROS
amazingly flavor CLR adapter spare tank drip tip is a new favorite very high quality
CONS
resistance can be a bit wacky I can't get the drip tip to sit flush
I'll start off by saying this tank has some of the best flavor I've ever tasted, and I honestly wasn't expecting it. I love the look, I love the feel, filling is easy, good airflow. it even comes with options, I haven't tested the CLR adapter yet, but I will soon as I got some CL heads with my VTC mini kit recently. building it could prove to be frustrating if you're inexperienced, but it didn't really take me much longer than normal to get a coil on it. here's where we get to the kicker, this tank will not work on every mod. when I first built it, the resistance was all over the place, but after taking a good look at it, it appeared the plastic chimney wasn't threading all the way into the base and making a good connection. I took out the 510 pin/deck, and took a good 5 minutes screwing and unscrewing the plastic chamber as far as I could into the base. when I was done I got a good 3mm further down than when I started, great! threw it onto my IPV D2, rock solid resistance. tried my VTC mini, no jumping. tried it on a heatvape invader mini, either no connection, or very wild resistance. I strongly advise not using this atomizer with a long fixed pin mod. it's just too easy to over tighten the atomizer to a point it either shorts or makes no contact. other than that fairly obvious flaw (I mean, what were you expecting? it's a floating 510 in a plastic chimney), it works very well. even though I could get it stable in TC with titanium, because of these inherent issues, it's probably better suited to a regular kanthal build on a small mech. I love it and I actually bought another.
Reviewed on