phlegmor's Product Reviews
Sort:

phlegmor
Verified

VERIFIED OWNER
  • JoinedNov 2014
  • Posts 652
  • Reviews 295
  • Kudos753
Overall   (3.5)
› Quality
› Value
This is much easier to use than the Narda. Coiling is done and perfect in mere seconds, the chamber is also much more forgiving when it comes to different builds. The draw is quite noisy but the typical Narda whistle, while present with certain builds and positioning, can be totally eliminated (3mm coils were better than 2.5mm coils for me, but coil height makes a difference as well. You can build hotter than in the Narda. About this SKU: Build quility is great, but the top cap does not go down all the way to the base and will leave a ~0.5mm gap, which is quite visible and almost makes me want to buy another SKU. The optional PEI cap leaves an even bigger gap. The O-Rings are not great.
Reviewed on

phlegmor
Verified

VERIFIED OWNER
  • JoinedNov 2014
  • Posts 652
  • Reviews 295
  • Kudos753
Overall   (5.0)
› Quality
› Value
It's kind of like the Narda. It has almost Narda flavour, no Narda whistle (it's not completely silent though) and it's almost as tough to find a good build for it as it is for the Narda. If you like builds with complicated wires, try an ID of 2.5mm to give the air some room to try and cool your coil down again. Better (for me) were single wire parallel coils with thinner wire (AWG 26 or 27) and bigger IDs (3-3.5mm). The stainless steel top cap does not touch the positive block, so there will be no shorts. The YFTK PEI and PEEK top caps fit this atomizer.
Reviewed on

phlegmor
Verified

VERIFIED OWNER
  • JoinedNov 2014
  • Posts 652
  • Reviews 295
  • Kudos753
Overall   (4.0)
› Quality
› Value
They are not exactly 22mm (a bit bigger) and neither are they very well made, but if you own a IPV Vesta, An iStck TC 100W or a Pico Squeeze, you better order some asap, because they do the deed (by somewhat mitigating ulterior and shallow 510-connections). The ultem ones you can buy here are pretty, but too thick to be usable for anything. Cheers!
Reviewed on

phlegmor
Verified

VERIFIED OWNER
  • JoinedNov 2014
  • Posts 652
  • Reviews 295
  • Kudos753
Overall   (5.0)
› Quality
› Value
You can use this to make your Velocity RDA look like you're using the chuff tip while you still get all the flavour. Ok, the inner bore could be a just bit wider for that purpose. That slightly rough teflon finish provides a good mouthfeel. I like it.
Reviewed on

phlegmor
Verified

VERIFIED OWNER
  • JoinedNov 2014
  • Posts 652
  • Reviews 295
  • Kudos753
Overall   (5.0)
› Quality
› Value
I bought this little tank to use with the Atto mod in 18350 mode, but I have not found the right balance between agressiveness (2mm AWG30 coil) and smoothness (2.5mm AWG26 coil) yet that won't also stress those little batteries too much. What the Le Zephyr is to the Le Mirage, this little atomizer is to the Split atty. The first two are just easier to build and use and taste phenomenal. The latter two are smaller, look great and are more interesting. This particular SKU is build flawlessly by the manufacturer. Highly recommended if you look for something small or something to tinker with. 8)
Reviewed on