shopping cart empty
plague91's Product Reviews
Sort:

plague91
Member

VERIFIED OWNER
  • JoinedSep 2013
  • Posts 538
  • Reviews 22
  • Kudos287
Overall   (5.0)
› Quality
› Value
1 of 1 people found the following review helpful
PROS
fantastic switch 3 one piece brass tubes for about £11! quality threads
CONS
locking ring not reverse threaded (not a big deal once you're used to it) a few small tweaks required to get it perfect (see review)
one of my new favorites! the switch is perfect, soft touch, short throw and stands without firing unlocked thanks to the clever little feet on the locking ring. it's a really nice recessed design, but it's slightly convex so you can still fire it easily with the side of your finger. out the box it will wobble while standing up, but all you need to do is a little filing on the firing pin edges so that it meshes better with the countersunk nut (it's an easy fix and should be quite obvious when you see it) i also had to sand a bit off the top cap insulator to get it to make contact with my tobh (short 510 connector, again, no big deal) in summary, it looks awesome, the switch is brilliant, it hits hard, it's great value. it might not be a new design, but it works amazingly well.
Reviewed on Was this review helpful to you? Yes / No
*SALE* Immortalizer RDA Rebuildable Dripping Atomizer
*SALE* Immortalizer RDA Rebuildable Dripping Atomizer

plague91
Member

VERIFIED OWNER
  • JoinedSep 2013
  • Posts 538
  • Reviews 22
  • Kudos287
Overall   (3.5)
› Quality
› Value
1 of 1 people found the following review helpful
PROS
great flavour clean threads
CONS
can be a little fiddly to build drip tip is too loose, wont fit on anything (fatter o rings should solve this) VERY tight draw (easily fixed as the aluminium outer sleeve is easy to drill out)
got this running with a micro coil at the moment and it's great. the deck is quite cramped so building is a bit more fiddly than most other attys ive tried, but its perfectly manageable. the stock draw is very tight, i've drilled the 2 air holes on the outer sleeve out to 2mm and it's much nicer. only downside is that the fatty v3 is cheaper, looks nicer, has AFC and i suspect it will perform just as well. i plan to order one and find out
Reviewed on Was this review helpful to you? Yes / No
DJV Styled RDTA Rebuildable Dripping Tank Atomizer
DJV Styled RDTA Rebuildable Dripping Tank Atomizer

plague91
Member

VERIFIED OWNER
  • JoinedSep 2013
  • Posts 538
  • Reviews 22
  • Kudos287
Overall   (2.2)
› Quality
› Value
PROS
.easy refill .basically a leak free kennedy with a 2ml juice well
CONS
.crazy long positive pin .low quality brass posts and fill port
great design, but the 510 pin needs filing down to be useable. my main concern is the brass posts and centre post thingy, after only a few days of use they have turned an unpleasant shade of green, and seeing as your juice is going to be in contact with the centre post, that's something i'm not comfortable with from a health perspective. other than that, it really is a great design, so good that i ordered the authentic. wicks really well using stainless mesh slugs, which also make rewicking the coils just as easy as a regular RDA. give it a go if you're not sure if you'll like the design, but i really wouldn't want to run more than a few tanks through it. otherwise, just buy the authentic.
Reviewed on Was this review helpful to you? Yes / No
SXK Shift Styled RDA Rebuildable Dripping Atomizer
SXK Shift Styled RDA Rebuildable Dripping Atomizer

plague91
Member

VERIFIED OWNER
  • JoinedSep 2013
  • Posts 538
  • Reviews 22
  • Kudos287
Overall   (5.0)
› Quality
› Value
PROS
.can get a satisfying MTL draw or a nice restricted lung hit .sensible squonking design .tiny chamber .two caps .flavour
CONS
.needs a screwdriver to adjust airflow (not a problem if you set and forget) .plastic caps, so obviously not meant for crazy hot builds
looking at the chamber size it's obvious this is going to be a good MTL flavour atty, and with the airflow screw all the way down it certainly is (feels like about a 1.6-1.8mm draw), but wide open you can do quite nice lung hits with it too. that't not what i bought it for, but its nice to see the versatility there. the squonk pin is quite clever, if you build a single horizontal coil then when you squonk it wets the wick right next to either end of the coil, instantly saturating the coil every time. ive been running with a 1 ohm 27g build ( about 8 wraps at 2.5mm) on a pico squeeze and im loving it. i might actually prefer it to the origen little, although that excels in other areas
Reviewed on Was this review helpful to you? Yes / No

plague91
Member

VERIFIED OWNER
  • JoinedSep 2013
  • Posts 538
  • Reviews 22
  • Kudos287
Overall   (4.7)
› Quality
› Value
PROS
.tiny .clean looking .3 AFC rings .good flavour .holds a decent amount of juice without leaking
CONS
.can't properly close off the AFC (not a problem if you tend to vape at around 0.4/0.3 like me) . hard to see where the AFC is positioned or if the coils are lined up with the air holes
lovely little device. looks classy as hell of my SS SMPL with the brass AFC ring and a brass vapetasia DT clone. flavour is good thanks to the tiny chamber, leak resistant too due to the top air holes. my only criticism is that it's hard to see where the AFC is positioned and if the air holes are over the coils, not a major issue though
Reviewed on Was this review helpful to you? Yes / No