shopping cart empty
rogerile34's Product Reviews
Sort:
Replacement Screws for Atomizers (10-Pack)
Replacement Screws for Atomizers (10-Pack)

rogerile34
Member

VERIFIED OWNER
  • JoinedSep 2014
  • Posts 41
  • Reviews 89
  • Kudos41
Overall   (5.0)
› Quality
› Value
2 of 2 people found the following review helpful
PROS
Fit Limitless and OBS Engine Good tolerance on hex head
These fit the OBS Engine and Limitless RDTA, and tolerances on the hex heads are much tighter than the horrible screws that come with the Engine. Work as intended, and haven't had a stripped screw yet.
Reviewed on Was this review helpful to you? Yes / No
Replacement Tank for Orchid V6 RTA Rebuildable Tank Atomizer
Replacement Tank for Orchid V6 RTA Rebuildable Tank Atomizer

rogerile34
Member

VERIFIED OWNER
  • JoinedSep 2014
  • Posts 41
  • Reviews 89
  • Kudos41
Overall   (4.5)
› Quality
› Value
2 of 2 people found the following review helpful
PROS
Much easier to fill than stock 3-part tank Allows seeing juice level Perfect fit for Orchid V4
Would recommend for the reasons above. I got this PC version to replace the similar acrylic tanks FT has - I tried 2 acrylic tanks and both cracked around the threading within 2 weeks of use. So far after a week the PC is holding up fine, no cracks yet.
Reviewed on Was this review helpful to you? Yes / No
Authentic Hellvape Dead Rabbit RTA Rebuildable Tank Atomizer
Authentic Hellvape Dead Rabbit RTA Rebuildable Tank Atomizer

rogerile34
Member

VERIFIED OWNER
  • JoinedSep 2014
  • Posts 41
  • Reviews 89
  • Kudos41
Overall   (3.0)
› Quality
› Value
1 of 1 people found the following review helpful
PROS
Good juice capacity Knurling on top cap and base Tons of airflow
CONS
Very, very frustrating to attach chamber to base
Overall not a bad tank. Vapes well once assembled, coiling/wicking difficulty is standard for tanks this size. Once set up it vapes great, and has more than enough airflow, wide open it's too much. The knurling on top cap is really nice, something that other manufacturers should think about. The real problem is attaching the base, and getting the chamber to align with the tabs on the base, is very, very frustrating. As in it takes 10 tries or more to get it aligned and the threads started, with multiple cross-threadings. The tabs are too small and engage at the same time as the base threads. It's a poor design. Overall, it vapes like a Zeus, with easier wicking but tons more frustration in assembling.
Reviewed on Was this review helpful to you? Yes / No

rogerile34
Member

VERIFIED OWNER
  • JoinedSep 2014
  • Posts 41
  • Reviews 89
  • Kudos41
Overall   (3.2)
› Quality
› Value
1 of 1 people found the following review helpful
PROS
Huge airflow for an RTA Massive channels Good build quality (except for neg. posts)
CONS
Negative posts and screws are faulty 510 screw is nearly flush with atty Tank design is terrible
This is good considering the price, but there are a few big problems. The airflow and juice channels are huge, and once you finally get it set up, the cloud production is really amazing for a tank atty. Flavor is ok, not the best, but in line with what you'd expect given the airflow focus of this. The overall build quality is good, and mine arrived very clean, mostly good threads, and without burrs or shavings. One problem is the negative screws/posts are terrible. There is either a mis-match between the thread/tap diameter and the screws, or maybe the screws used are very low quality. Both spun freely in the neg. post holes. In one post, a replacement screw that came with the atty seems to bite ok - in the other, I had to put a piece of thin Kanthal in to get it to thread. The fill screw is also bad - either mis-sized or just inferior, but it's easy to mis-thread. Another is the tank, and in the poor design choice to put the glass section only at the top - making filling a bit of a guessing game. Another negative point is the 510 screw is almost flush with the base of the 510 connector - so close that I wouldn't use it in a hybrid mod. This is something that could easily have been done right, and shows shoddy design. Overall, these problems are less significant when the price is considered, and it vapes great once set up, so I'd recommend it as long as you're willing to tinker with it.
Reviewed on Was this review helpful to you? Yes / No
Authentic Eleaf Lemo 2 RTA Rebuildable Tank Atomizer
Authentic Eleaf Lemo 2 RTA Rebuildable Tank Atomizer

rogerile34
Member

VERIFIED OWNER
  • JoinedSep 2014
  • Posts 41
  • Reviews 89
  • Kudos41
Overall   (5.0)
› Quality
› Value
1 of 1 people found the following review helpful
PROS
Top fill works perfectly Great build quality and finish Airflow adjustment that actually works Nice packaging and accessory kit
CONS
Limited tank capacity
A really excellent RTA. Build quality, machining, and finish are great. My version came in very clean, no burrs or machining oil. Building and wicking is dead easy, plenty of room, separable chimney, and screws/threads are good. Airflow is generous, not Mut-X level wide open, but enough for a comfortable lung hit. A bit more than the Orchid, but not surprisingly so. Airflow adjustment works well, and is easy to set. The top fill works perfectly, and would be worth the price alone in terms of convenience over Orchid/Goblin type filling. I've had no leaking at all from the fill hole, so far - it seems to be sealed with a silicone gasket/o-ring, and I'm a bit afraid it'll wear over time, given how often this needs to be filled. If there's a con, it's in the tank capacity - I wouldn't mind a few more mm in tank length to get this up to 5+ ml, but it's not a huge problem given the top fill method. Overall, a definite recommended buy.
Reviewed on Was this review helpful to you? Yes / No