[dismiss] FastTech will be on holiday from October 1, 2022 to October 7, 2022. All services resume on October 8, 2022, at 1:00 am (UTC). (details).
rogerile34's Product Reviews
Sort:

rogerile34
Verified

VERIFIED OWNER
  • JoinedSep 2014
  • Posts 48
  • Reviews 117
  • Kudos48
Overall   (5.0)
› Quality
› Value
PROS
Top fill works perfectly Great build quality and finish Airflow adjustment that actually works Nice packaging and accessory kit
CONS
Limited tank capacity
A really excellent RTA. Build quality, machining, and finish are great. My version came in very clean, no burrs or machining oil. Building and wicking is dead easy, plenty of room, separable chimney, and screws/threads are good. Airflow is generous, not Mut-X level wide open, but enough for a comfortable lung hit. A bit more than the Orchid, but not surprisingly so. Airflow adjustment works well, and is easy to set. The top fill works perfectly, and would be worth the price alone in terms of convenience over Orchid/Goblin type filling. I've had no leaking at all from the fill hole, so far - it seems to be sealed with a silicone gasket/o-ring, and I'm a bit afraid it'll wear over time, given how often this needs to be filled. If there's a con, it's in the tank capacity - I wouldn't mind a few more mm in tank length to get this up to 5+ ml, but it's not a huge problem given the top fill method. Overall, a definite recommended buy.
Reviewed on

rogerile34
Verified

VERIFIED OWNER
  • JoinedSep 2014
  • Posts 48
  • Reviews 117
  • Kudos48
Overall   (5.0)
› Quality
› Value
PROS
Huge bore and tall Finish is good Minimalist, simple, no cheesy engravings O-ring and fit are good
Perfect if you want a huge DT with a simple, clean design. Bore at the bottom has room to be drilled out more.
Reviewed on

rogerile34
Verified

VERIFIED OWNER
  • JoinedSep 2014
  • Posts 48
  • Reviews 117
  • Kudos48
Overall   (2.5)
› Quality
› Value
PROS
Machining and threads are good.
CONS
Doesn't work.
Good news is that the top-fill works great and the top cap is a nice design. Bad news is that nothing else works. The main problem is the chimney is too short - it's not long enough to fully seat inside the top cap o-ring, so there's no way to prevent leaking. The top of the chimney will touch the o-ring, but only if the chamber is unscrewed almost completely, which means that the juice channels are wide-open and it floods out the air holes. The tank just empties out in a constant stream. And if you can get the tank to thread with the chamber unscrewed, the notch at the top of the chimney bites into the o-ring, tearing it up and making adjustment of the chamber impossible. As I was thinking of ways to extend the chimney (or shorten the tank height - Taifun tank doesn't fit, haven't tried any others), I noticed that it also leaks in a straight through the 510 and into the mod. I was hoping this could replace the Orchid, with top filling, but this thing's a loser. Stick with the Orchid, or maybe wait for the Goblin/Silverplays/etc. to show up.
Reviewed on
Resin 810 Drip Tip
Resin 810 Drip Tip

rogerile34
Verified

VERIFIED OWNER
  • JoinedSep 2014
  • Posts 48
  • Reviews 117
  • Kudos48
Overall   (5.0)
› Quality
› Value
PROS
Large size Economical
Large size drip tip to keep your lips away from hot attys. No defects, works well.
Reviewed on

rogerile34
Verified

VERIFIED OWNER
  • JoinedSep 2014
  • Posts 48
  • Reviews 117
  • Kudos48
Overall   (5.0)
› Quality
› Value
PROS
Big drip tip No defects
A nice big drip tip to keep your lips away from hot attys . Fits well, and had no defects.
Reviewed on