shopping cart empty
vapeluvr's Product Reviews
Sort:
FASTTECH Anti-slip Ring for E-Cigarette Atomizers and Mods (5-Piece Pack)
FASTTECH Anti-slip Ring for E-Cigarette Atomizers and Mods (5-Piece Pack)

Avatar
vapeluvr
Member

VERIFIED OWNER
  • JoinedJan 2015
  • Posts 6307
  • Reviews 243
  • Kudos3726
Overall   (5.0)
› Quality
› Value
2 of 3 people found the following review helpful
PROS
great quality
CONS
none
These are great and fit 22mm atomizers. Love the FT logo on them and the colors pictured are exactly what I received in both packs I ordered.
Reviewed on Was this review helpful to you? Yes / No
Replacement Rebuildable RBA Coil Head for Atlantis Clearomizer
Replacement Rebuildable RBA Coil Head for Atlantis Clearomizer

Avatar
vapeluvr
Member

VERIFIED OWNER
  • JoinedJan 2015
  • Posts 6307
  • Reviews 243
  • Kudos3726
Overall   (5.0)
› Quality
› Value
2 of 3 people found the following review helpful
These are hit and miss apparently but mine was OK. The juice holes on the chamber line up with the coil cavity and not the posts like shown in FT pictures and as others are reporting on the ones they received. Can be hard to trap the coil legs. All in all, not bad for the price.
Reviewed on Was this review helpful to you? Yes / No
Stainless Steel 510 Drip Tip (5-Pack)
Stainless Steel 510 Drip Tip (5-Pack)

Avatar
vapeluvr
Member

VERIFIED OWNER
  • JoinedJan 2015
  • Posts 6307
  • Reviews 243
  • Kudos3726
Overall   (5.0)
› Quality
› Value
1 of 1 people found the following review helpful
I love these drip tips. Use them on all my tanks. Great for flavor junkies. Just be sure to wash them thoroughly before use.
Reviewed on Was this review helpful to you? Yes / No
Mini A7 Bottom Feeding Rebuildable Atomizer
Mini A7 Bottom Feeding Rebuildable Atomizer

Avatar
vapeluvr
Member

VERIFIED OWNER
  • JoinedJan 2015
  • Posts 6307
  • Reviews 243
  • Kudos3726
Overall   (3.2)
› Quality
› Value
2 of 3 people found the following review helpful
PROS
Nice small flavor tester for DIY juice makers Looks great Very good machining
CONS
510 positive pin too recessed 510 positive pin too wobbly hard to build lead holes misaligned very tight draw
It's very hard to build on because the lead holes on the neg and pos posts do not face outward as shown in the pics, rather they face each other, inward facing the air hole in the center. Making it impossible to build on. But can be don with a lot of frustration and messing up your coil. The positive pin on the 510, when screwed in all the way leaves the pin very recessed. Even unscrewing just one whole turn leaves the pin still a bit recessed and at that point the pin is VERY wobbly. One more turn will get it to protrude but then the wobble gets even worse. The thread on the 510 pin needs to be longer. That said, it's a great looking little dripper. Very well machined. Once you do finally get it built, it works good but since the air comes from the 510, it is quite a tight draw.
Reviewed on Was this review helpful to you? Yes / No
Hotcig GT-S V2 RTA Rebuildable Tank Atomizer (5.0mL)
Hotcig GT-S V2 RTA Rebuildable Tank Atomizer (5.0mL)

Avatar
vapeluvr
Member

VERIFIED OWNER
  • JoinedJan 2015
  • Posts 6307
  • Reviews 243
  • Kudos3726
Overall   (4.2)
› Quality
› Value
1 of 1 people found the following review helpful
PROS
Great looking Fairly well-built good flavor decent juice capacity
CONS
lots of parts funny flavor/needs excessive cleaning before first use heavy and tall
Overall it's a good little RTA. I have washed it 2 times now and I cannot get the chemical taste out of it totally. The first time took every single piece apart and I soaked it in vodka for 3 hours then rinsed it with very hot water. Got a chemical taste. Broke it all down again and soaked it in warm soapy water for another 3 hours and rinsed with hot water and I still taste the chemical taste, but not as badly. My next step is to boil it. It has A LOT of small parts to it so be careful when disassembling it. the 2 orings that go around the top and bottom of the glass tube are extremely thin and very hard to work with but very important to get it right so as to not have any leaking. Also, the heads on the stock screws that come with the neg and pos posts are wider than the posts themselves which can make it a bit tough to secure the coil legs. The AFC ring is a bit loose. See remedies on the forum. It does not bother me that much. I would recommend this tank to mouth hitters or to lung hitters who like/dome mind a little bit of a restricted lung hit. For those that have an aerotank with the V2 base or an aerotank mega with the V2 base, this RTA has a slightly more restrictive airflow than those tanks, even though this RTA has 2 sets of airflow holes. I would not recommend this to people who do not like a lot of tiny parts or those who like larger build decks. The space between the neg and pos posts is very small.
Reviewed on Was this review helpful to you? Yes / No