[dismiss] Holiday closure: from January 27th to February 7th, 2022. Shipping and support will resume on February 8th, 2022. (details)
FastTech wishes you and yours a safe and prosperous year of Tiger 🐱.
vapeluvr's Product Reviews
Sort:
1.5AMZ.SA Heat Resistant Stainless Steel Tweezers for E-Cigarettes
1.5AMZ.SA Heat Resistant Stainless Steel Tweezers for E-Cigarettes

Avatar
vapeluvr
Member

VERIFIED OWNER
  • JoinedJan 2015
  • Posts 7675
  • Reviews 340
  • Kudos4488
Overall   (3.2)
› Quality
› Value
PROS
Good quality
CONS
pointier than pictured not as blunt as pictured a bit pricey
Although these are good quality tweezers, the tips are not as blunt/round as pictured, they are much more pointy.sharp than shown in the picture.
Reviewed on Was this review helpful to you? Yes / No

Avatar
vapeluvr
Member

VERIFIED OWNER
  • JoinedJan 2015
  • Posts 7675
  • Reviews 340
  • Kudos4488
Overall   (5.0)
› Quality
› Value
PROS
good quality not too grippy on the mod silky feel
CONS
silky feel
This sleeve is of much higher quality than the picture shows and the seem is not nearly as visible as the picture shows either. I ordered this and the branded 2283002 version and like this so much more. This one slips very easily off them mod when I need to take it off to change the battery (I do not charge the battery inside the unit). The texture of this sleeve is silky so it does not grip on the hand as well as I'd like, however, that means is does not grip the mod too much either, which I like as stated previously. I also like that this does not have the lip on the top part. No need for it in my opinion and makes it that much easier to pull off when I need to change the battery. I'll be ordering another one of these and trashing the other one of these when it's back in stock.
Reviewed on Was this review helpful to you? Yes / No

Avatar
vapeluvr
Member

VERIFIED OWNER
  • JoinedJan 2015
  • Posts 7675
  • Reviews 340
  • Kudos4488
Overall   (3.0)
› Quality
› Value
PROS
Good quality manufacturing
CONS
Too much grip
Good quality, but I did not care for the fact that it was not only too grippy in the hand, but also too grippy on the mod itself which made removing it not very easy. The other sku 2248900 which has no top part is much silkier and slips off the mod easier. I also did not care for the top part and so I cit it off. All in all, I will be discarding this and ordering the 2248900 once the back is in stock again. I don't charge my batter within the mod so taking the sleeve off frequently means it needs to be easy. This sleeve does not allow easy removal.
Reviewed on Was this review helpful to you? Yes / No

Avatar
vapeluvr
Member

VERIFIED OWNER
  • JoinedJan 2015
  • Posts 7675
  • Reviews 340
  • Kudos4488
Overall   (1.5)
› Quality
› Value
PROS
Nice construction Good milling Nice look
CONS
POM 510 too wide flavor seems bit muted
Better, smoother milling than shown in pics. But I think perhaps the flavor is muted but most importantly, the POM 510 is too wide and too long. Fits too tight on subtank, Nautilus, Aerotank and Atlantis. Will need needle-nose to pry off of the tank. VERY tight fit on subtank mini and nano. On Kanger tanks, the POM is too long and will not fit whole way down so a few mm of POM will show...same on atlantis but much less. It might wear down a bit so it's easier to pull off and push on a tank, otherwise will need to shave it down a bit. Will need to cut off the bottom abit to make fit on Kanger tanks with no POM showing. All in all, I don't really recommend.
Reviewed on Was this review helpful to you? Yes / No
18650 Battery Sleeve PVC Heat Shrinkable Tubing (50-Pack)
18650 Battery Sleeve PVC Heat Shrinkable Tubing (50-Pack)

Avatar
vapeluvr
Member

VERIFIED OWNER
  • JoinedJan 2015
  • Posts 7675
  • Reviews 340
  • Kudos4488
Overall   (2.7)
› Quality
› Value
PROS
It shrinks well
CONS
too short too shiny
I used this to wrap 2 Samsung 25R 18650 batts as the ones I had were going bad. In my opinion, I think they are about 1mm too short to wrap a battery safely. I won't be buying or using these or any other pre-cut battery sleeve again. I will stick with the rolls from now on. They are also very shiny. I was hoping they would be that matte and slightly rubbery finish/feel you get on wire heat shrink.
Reviewed on Was this review helpful to you? Yes / No