shopping cart empty
wraithpc's Product Reviews
Sort:
BF99 Style Genesis Rebuildable Atomizer (2ml)
BF99 Style Genesis Rebuildable Atomizer (2ml)

Avatar
wraithpc
Member

VERIFIED OWNER
  • JoinedAug 2013
  • Posts 1470
  • Reviews 228
  • Kudos1927
Overall   (5.0)
› Quality
› Value
3 of 3 people found the following review helpful
Got this, took it apart, cleaned it up real good, was not full of machine oil which is always a plus. Comes apart completely for easy cleaning, and maintenance. Build quality is pretty decent, the Paint (ceramic coating?) is not bad, I've not chipped it yet, unlike the original which seems to fall off just looking at it. My first impression when I looked at this was, wow, this is going to be a tight draw, surprisingly, it really isn't that bad. No lung hits, but mouth to lung is not so bad. Could probably carefully open it up for a much better vape, I may just do this sometime down the road. Build quality seems reasonable, not the best I've seen, but pretty fair. The one place I question this is they use some shrink wrap on the strangely curved brass center post, this is a pretty critical area as any issue with this shrink wrap would lead to a dead short. The shrink wrap is of questionable quality, and I'll probably purchase some high quality shrink wrap and redo it for peace of mind. I bought this to use with the LPG sold here at Fasttech. While it does work, one caveat, the atomizer comes with two glass tank sections, one frosted with logo, and one clear, no logo. The Frosted tank section is just very slightly thicker then the clear, enough so it will not fit into the LPG mod with the frosted tank. It is fine with the clear tank. I've had no leaking issues that I've seen reported. I built this very similar to a standard kayfun build for the first build, micro coil, and organic cotton wicking, even with tilting, and a 50/50 juice I get a little low saturated hits, the wick holes could be slightly larger which would make it better. I'll have to experiment with some different wicking material, maybe some jap cotton, or possibly a little Rayon. With a little experimentation with amount, and type of wick it shouldn't be difficult to get it wicking properly. Probably not a great choice for inexperienced builders, but the nice flavor produced from the reduced chamber makes it a solid atomizer IMO. I like it.
Reviewed on Was this review helpful to you? Yes / No
Le Magister Styled RDA/RTA Rebuildable Dripping Atomizer
Le Magister Styled RDA/RTA Rebuildable Dripping Atomizer

Avatar
wraithpc
Member

VERIFIED OWNER
  • JoinedAug 2013
  • Posts 1470
  • Reviews 228
  • Kudos1927
Overall   (5.0)
› Quality
› Value
2 of 2 people found the following review helpful
Flavor Atty, airflow is a little tight, centerpost is a bit short to get two .26 gauge coils on it, otherwise build quality is near flawless. good flavor!
Reviewed on Was this review helpful to you? Yes / No
Ubertoot UTA2 Styled RTA Rebuildable Tank Atomizer
Ubertoot UTA2 Styled RTA Rebuildable Tank Atomizer

Avatar
wraithpc
Member

VERIFIED OWNER
  • JoinedAug 2013
  • Posts 1470
  • Reviews 228
  • Kudos1927
Overall   (5.0)
› Quality
› Value
2 of 2 people found the following review helpful
No wicking issues, no condensation issues, very easy to build! Extremely good flavor, produce dense flavorful vapor!
Reviewed on Was this review helpful to you? Yes / No
Origen Genesis V2 Styled RTA Rebuildable Tank Atomizer (4ml)
Origen Genesis V2 Styled RTA Rebuildable Tank Atomizer (4ml)

Avatar
wraithpc
Member

VERIFIED OWNER
  • JoinedAug 2013
  • Posts 1470
  • Reviews 228
  • Kudos1927
Overall   (4.0)
› Quality
› Value
2 of 2 people found the following review helpful
Just got this, the aluminum base is really cheap feeling! The tank was VERY difficult to get off, it was tightened way to much, as was every part of this, used my old trick of wrapping tape around it to get it apart, had to cut the tape off after, the aluminum is so cheap my tiny little scissors took a chunk out of it! very thin and soft, one post said it feels like an aluminum can, that is a pretty good description! no problems with the current path, or ground, works perfectly in that respect. This one DOES have a hole in the post. The thing vapes really nice single .26 gauge 3mm micro @.7 ohms and some cotton, will try a dual coil next time. Flavor is very nice, as is vapor production. I mainly bought it to see if I would like it, now to find a better clone of it, or a deal on an authentic, I love it!
Reviewed on Was this review helpful to you? Yes / No
Guppy Styled 16340 Mechanical Mod
Guppy Styled 16340 Mechanical Mod

Avatar
wraithpc
Member

VERIFIED OWNER
  • JoinedAug 2013
  • Posts 1470
  • Reviews 228
  • Kudos1927
Overall   (5.0)
› Quality
› Value
1 of 1 people found the following review helpful
Very nicely machined, smooth threading, switch is easy to use and works well, battery life is pretty decent with quality batteries, makes an excellent match with the KayFun Mini V3.
Reviewed on Was this review helpful to you? Yes / No